YITAHOME DGHX-V1 TV STAND ASSEMBLY INSTRUCTIONS
Pure & Easy
Notice:
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, refer to two solutions: Follow the installation video tutorial on the Amazon product page or contact YITAHOME customer service.
Parts List
| Item no. | Reference Image | Qty. | Item no. | Reference Image | Qty. |
|---|---|---|---|---|---|
| A | [Screw M3.5x14] | x36 | K | [Cam Lock] | x2 |
| B | [Screw M4x16] | x36 | L | [Cam Bolt M4x16] | x8 |
| C | [Screw Ø8x30] | x26 | M | [Screw M4x18] | x4 |
| D | [Screw Ø7x48] | x6 | N | [Screw M3.5x12] | x24 |
| E | [Screw M3.5x14] | x1 | P | [Screw M4x18] | x4 |
| F | [Screw M3.5x14] | x10 | Q | [Allen Wrench] | SET |
| G | [Screw M3.5x14] | x2 | |||
| H | [Screw M3.5x12] | x4 | |||
| I | [Screw M3x16] | x12 | |||
| J | [Screw M3x16] | x12 |
Step 1
Attach parts 9, 10, 11, and 12 to the side panels using screws (B).
Step 2
Attach the assembled side panels to the base and top panels using screws (A).
Ensure parts 8, 9, 10, 11, and 12 are correctly aligned.
Step 3
Attach the bottom panel to the side panels using screws (B).
Step 4
Attach the back panels using screws (B), (F), and (G).
Step 5
Assemble the shelves and attach them using screws (C) and (D).
Attach parts 13, 14, and 15.
Step 6
Attach the side panels using screws (A) and (C).
Step 7
Attach the shelves and supports using screws (A) and (C).
Ensure parts 5 and 6 are correctly positioned.
Step 8
Attach the side panels and supports using screws (A) and (C).
Step 9
Attach the barn doors using screws (K) and (L).
Step 10
Attach the top panel using screws (F) and (E).
Step 11
Slide the back panels into place.
Step 12
Attach the top panel using screws (C) and (A).
Step 13
Attach the drawer slides using screws (I) and (J).
Step 14
Secure the TV stand to the wall using the provided hardware (1) and (7).
WALL MOUNTING IS RECOMMENDED FOR SAFETY.
Step 15
Insert the drawers using part (7) and secure with screws (H).
Step 16
Attach the door hinges using screws (F), (G), (P), (N), (M), and (Q).
Turn over 180 degrees.
Step 17
Attach the doors using screws (N).
Step 18
Installation Completed.
