MINISO Cool Style Wireless Headset MLD99
Model: MLD99
FCC ID: 2BB2Y-MLD99
Brand: MINISO
Product Overview
A visual representation of the MINISO Cool Style Wireless Headset MLD99 shows an over-ear design. It features a padded adjustable headband connecting two large earcups. Each earcup is depicted with integrated control buttons, likely including power, volume adjustment, and playback control. A small microphone is also indicated, typically integrated into one of the earcups. The charging port is shown on one of the earcups.
This wireless headset offers a comfortable fit and high-quality audio for music and calls.
Product Features
- Wireless Bluetooth connectivity for freedom of movement.
- Delivers high-quality sound reproduction.
- Integrated microphone enables hands-free calling.
- Ergonomically designed for extended wear comfort.
- Extended battery life for prolonged usage.
Functions
- Power On/Off
- Press and hold the power button for 3 seconds.
- Pairing Mode
- Automatically enters pairing mode when powered on for the first time. The indicator light will flash blue and red.
- Play/Pause/Call Control
- Short press the power button.
- Next Song
- Long press the volume up button.
- Previous Song
- Long press the volume down button.
- Volume Up
- Short press the volume up button.
- Volume Down
- Short press the volume down button.
- Voice Assistant Activation
- Double-click the power button.
Specifications
| Feature | Specification |
|---|---|
| Model | MLD99 |
| Bluetooth Version | V5.0 |
| Wireless Range | Up to 10 meters (33 feet) |
| Battery Capacity | 300mAh |
| Play Time | Up to 15 hours |
| Charging Time | Approx. 2 hours |
| Driver Unit | 40mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32Ω |
| Sensitivity | 105dB ± 3dB |
| Microphone Sensitivity | -42dB ± 3dB |
| Operating Temperature | -10°C to 50°C |
Troubleshooting
- No Sound: Verify the headset is powered on and successfully connected to your device. Ensure the volume is turned up on both the headset and the connected device.
- Connection Failed: Power off both the headset and your device, then power them back on and attempt to re-pair. Confirm the headset is within the specified wireless range.
- Poor Sound Quality: Ensure the headset battery is sufficiently charged. Check for potential interference from other active wireless devices in the vicinity.
- Cannot Charge: Confirm that the charging cable and power adapter are functional. Inspect and clean the charging port on the headset for any debris.
Precautions
- Do not attempt to disassemble or modify the headset, as this may cause damage or malfunction.
- Avoid exposing the headset to extreme temperatures (high or low) or high humidity environments.
- Keep the headset away from all liquids and moisture.
- Refrain from using the headset while driving or operating heavy machinery to maintain full situational awareness.
- Always use the provided charging cable for optimal charging performance and safety.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
