Miniso E21016A Stretchable Wireless Headset User Manual
This manual provides important information regarding the use and care of your Miniso E21016A Stretchable Wireless Headset.
Product Overview
The Miniso E21016A is a stretchable wireless headset designed for audio playback and communication.
Product Parts
The headset includes:
- Volume + button
- Play button
- Volume - button
- MIC port
- AUX port
- Type-C Charging Port
- LED Indicator Light
Technical Specifications
| Parameter | Specification |
|---|---|
| Bluetooth Version | V5.0 |
| Model Name | MINISO-E21016A |
| Function | Wireless headset |
| Input | DC 5V |
| Battery Capacity | 200mAh |
| Music Playback Time | 22h |
| Standby Time | 100h |
| Frequency Range | 20Hz-20KHz |
| Sensitivity | 105±3dB |
| Transmission Distance | ≤10M |
| Charging Time | 2.5h |
| Talk Time | 22h |
| Impedance | 32Ω |
Functions and Operations
| Function | Instructions |
|---|---|
| Power On | Press and hold the play button for 3 seconds. The LED indicator will blink red and blue. |
| Power Off | Press and hold the play button for 3 seconds. The LED indicator will blink red. |
| Pairing Mode | Open the Bluetooth of the device and search for the pairing name MINISO-E21016A. The blue LED indicator will blink slowly, and the earphones will enter pairing mode. |
| Next Track / Volume + | Short press the Volume - button to go to the previous track. Long press Volume + to increase the volume. The blue LED will blink slowly. |
| Previous Track / Volume - | Short press the Volume + button to go to the next track. Long press Volume - to decrease the volume. The blue LED will blink slowly. |
| Play / Pause | Press the play button. The blue LED will blink slowly. |
| Answer Call | Press the play button. The blue LED will blink slowly. |
| Hang Up Call | Press the play button. The blue LED will blink slowly. |
| Cancel Call | Press the play button. The blue LED will blink slowly. |
| Reject Call | Long press the play button. The blue LED will blink slowly. |
| AUX Port | You can listen to audio from external devices by plugging in the audio cable. |
Cautions
- Reasonable control of the volume and time of usage is required to avoid hearing damage.
- For your safety, do not use the headset in potentially hazardous conditions.
- Do not listen to music, call up, or answer the phone while driving to avoid danger caused by distraction.
- Keep out of reach of children to avoid danger caused by improper use.
- Do not throw to avoid damage caused by dropping.
- Do not store or use it under -20°C or above 45°C to avoid shortening the lifespan of earphones and battery.
- Do not modify, disassemble or repair the product.
- The battery should be disposed of according to local rules & regulations or be recycled by professional institute. Do not throw it into fire.
- When not in use for a long time, charge the earphones once every 3 months.
- Avoid contact with water and other liquids to prevent them from penetrating.
- Do not throw into fire to avoid the danger of explosion.
Troubleshooting
- Problem: Cannot pair the wireless earphones.
Solution: Check if the Bluetooth function is on. Verify the pairing name on your phone and follow the instructions in the manual to pair the earphones. - Problem: Cannot turn on the wireless earphones.
Solution: Check the battery. If the battery is low, charge it. - Problem: Cannot hear audio from the computer or phone.
Solution: Check whether the Bluetooth is connected. Check whether the audio output is set to the headset. - Problem: The wireless earphones are disconnected.
Solution: The Bluetooth technology has a limited range. Keep the earphones and the device within 10 meters. Avoid obstacles between the connection. - Problem: Cannot play audio from external devices.
Solution: Ensure the audio cable is properly connected to both the headset and the external device. - Problem: Can I operate the Apps of my phone through the earphones after connecting the phone?
Solution: Some applications may not be compatible with the headset's controls.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet RF exposure limits. This device can be used in portable exposure conditions without restriction.
Safety Information
General Safety Precautions:
- Handle with care to avoid damage.
- Keep away from water and moisture.
- Do not expose to extreme temperatures (below -20°C or above 45°C).
- Do not attempt to repair or modify the product yourself.
- Dispose of the battery responsibly according to local regulations.
- Avoid dropping the headset.
- Do not expose to fire.
