MINISO-M06 Bluetooth Earphones Product Manual
Introduction
Thank you for choosing the MINISO-M06 Bluetooth earphones. Please read this manual carefully before use to ensure correct operation and optimal performance. The MINISO Bluetooth earphones feature a stylish and modern design, are compact and portable, and deliver pure sound quality with a multi-function integrated design. They are protected by design patents and utilize leading electro-acoustic technology, providing an excellent audio experience for home use, outdoor travel, and business activities. They offer a superior sound quality experience for your notebook computers, digital music players, and other audio-visual products, allowing you to enjoy wonderful music and a healthy, happy life.
Safety Precautions
- Please control the volume and duration of headphone use reasonably to avoid hearing damage.
- Do not use the headset in potentially dangerous environments to ensure safety.
- Try to avoid using earphones to listen to music or make/answer calls while driving, to prevent distraction and potential danger.
- Keep earphones out of the reach of children to prevent accidents due to improper use.
- Avoid storing or using the headset in environments with temperatures below -20°C or above 45°C, as this may shorten the lifespan of the headset and battery.
- Do not disassemble, repair, or modify this product yourself.
- The battery in this product is not replaceable. Please dispose of it according to local regulations or return it to a professional recycling organization. Do not discard it arbitrarily or throw it into fire.
- If the earphones are not used for a long time, please charge them every 3 months to extend the battery life.
- Do not expose the battery to high-temperature environments such as direct sunlight or fire.
- The charger's output voltage and current should not exceed 5V/1A. Exceeding these limits may cause serious damage to the product and void the warranty.
- Please dispose of waste electronic products correctly. Do not discard electronic and electrical equipment, components, or batteries with household waste.
- Please charge in a safe environment. When charging the charging case, unplug the charging cable as soon as the battery is fully charged to prevent damage from prolonged charging.
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | V5.3 |
| Pairing Name | MINISO-M06 |
| Transmission Distance | 10m |
| Rated Input | 5V=300mA |
| Headphone Battery Capacity | 25mAh |
| Charging Box Battery Capacity | 200mAh |
| Charging Time | Approx. 1.5h |
| Music Time | Approx. 4.5h |
| Charging Interface | Type-C |
Package Contents
- Charging Case *1
- Earphones *2
- Data Cable *1
- Manual *1
Touch Function Operation
The earphones feature touch-sensitive controls on each earbud.
| Operation | Method |
|---|---|
| Power On | Earphones automatically turn on when removed from the charging case. Long press the touch area for 3 seconds for manual power on, accompanied by a prompt tone. |
| Power Off | Place earphones into the charging case to enter charging and power off mode. Long press the touch area for 5 seconds for manual power off. Earphones also automatically power off after 3 minutes of disconnection or out of range. |
| Play/Pause | Single tap the touch area on either earphone. |
| Answer/Hang Up Call | Single tap the touch area on either earphone during an incoming call or active call. |
| Reject Call | Press and hold the touch area on either earphone for 2 seconds during an incoming call. |
| Voice Assistant (SIRI) | Press and hold the touch area on either earphone for 3 seconds to activate the voice assistant. |
| Previous Track | Double tap the touch area on the LEFT earphone during playback. |
| Next Track | Double tap the touch area on the RIGHT earphone during playback. |
| Volume Up | Triple tap the touch area on the LEFT earphone during playback. |
| Volume Down | Triple tap the touch area on the RIGHT earphone during playback. |
Pairing Instructions
- Ensure the distance between the earphones and your mobile phone is within 1 meter.
- Open the charging case and remove the earphones. They will automatically power on and enter pairing mode. The left and right earphones will pair with each other automatically.
- Turn on the Bluetooth function on your mobile phone, search for devices, and select "MINISO-M06" to connect.
- If pairing fails, please repeat the above steps.
- After successful pairing, when the mobile phone's Bluetooth is on, simply open the charging case and take out the earphones for automatic connection. Placing them back into the case and closing the lid will disconnect them.
Troubleshooting
- 1. The Bluetooth headset cannot be paired with the mobile phone.
- Please check if the headset is in pairing or reconnection mode. Ensure your phone's Bluetooth search function is enabled. Check your device's Bluetooth menu, remove/cancel the headset, and reconnect according to the manual.
- 2. The Bluetooth headset cannot be turned on.
- Please check the power level of the headset.
- 3. Can the battery of the Bluetooth headset be replaced?
- No, this headset uses a non-removable polymer lithium battery.
- 4. The Bluetooth headset is disconnected from the mobile phone within 10 meters.
- Bluetooth is a wireless technology sensitive to obstructions. Check for metal objects or other items that might interfere with the connection within the range.
- 5. After the earphone is connected to the computer, the earphone cannot hear the sound.
- Please verify that the computer's audio output is set to the Bluetooth audio device and that the computer's Bluetooth supports the A2DP protocol. Also, check the volume levels on both the computer and the headset.
- 6. After the Bluetooth headset is connected to the mobile phone, can I use the headset to control applications on the mobile phone?
- Application software settings may vary. Some individual applications may not support control via the headset.
Names and Contents of Toxic or Hazardous Substances
This table indicates the presence of toxic or hazardous substances in the product's components, in accordance with SJ/T 11364.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr6+) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer casing components | ○ | ○ | ○ | ○ | ○ | ○ |
| Internal circuit board | ○ | ○ | ○ | ○ | ○ | ○ |
| Battery | ○ | ○ | ○ | ○ | ○ | ○ |
| Speaker | ○ | ○ | ○ | ○ | ○ | ○ |
| Earphone | ○ | ○ | ○ | ○ | ○ | ○ |
○: Indicates that the content of the hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in GB/T 26572.
The environmental protection use period for all parts of this product is 5 years, as indicated by the number 5 in the pollution degree symbol.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning for Portable Device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
