MINISO Wireless Headset G90 Product Manual

Manual Specifications (Internal Note)

This manual's physical specifications are: Dimensions: 70*95mm, Material: 80g writing paper, Double-sided printing. A red line indicates a dividing line (not printed).

CATALOGUE

• Item list
• Product Introduction
• Specification of Product
• Operating Instruction of Product
• Display screen operation
• Warranty Statement

Product Overview and Components

Item List

The MINISO Wireless Headset G90 package includes the headset itself, a foldable storage case, and a 3.5mm audio cable with a Type-C charging cable.

Headset Components

1. Volume Up/Next Track Button: Press once for volume up, long press for 2 seconds for next track.
2. Volume Down/Previous Track Button: Press once for volume down, long press for 2 seconds for previous track.
3. Multi-function Button (Power/Play/Pause/Call): Long press for 3 seconds to power on, 5 seconds to power off. Tap once for play/pause or answer/end call. Long press for 2 seconds to reject call or activate voice assistant. Double click for call callback.
4. Microphone
5. LCD Display Screen
6. Display Charging Interface
7. Transmission Contacts
8. 3.5mm Audio Jack
9. Charging Interface
10. Indicator Light
11. ANC Noise Reduction Switch

Touch Operation

Connect with Bluetooth Device

To pair the headset, open the Bluetooth settings on your device. Search for 'MINISO-G90' in the list of available Bluetooth devices and tap to connect. For subsequent uses, the headset will automatically connect to previously paired devices.

Note: For Android systems, the Bluetooth device volume is synchronized with the device.

Specification of Product

• Model of Product: G90
• Version: V5.4
• Effective Distance: Approx. 10m
• Speaker Diameter: ⌀40mm
• Impedance: 32Ω
• Frequency Response: 20Hz-20KHz
• Microphone Sensitivity: -38dB±3dB
• Input: 5V⎯600mA
• Battery Capacity: 600mAh
• Usage Time: Approx. 46 H
• Charging Time: Approx. 2 H

Operating Instruction of Product

Power On

Long press the multi-function power button (NO.3) for 3 seconds to turn on the device.

Shut Down

Long press the multi-function power button (NO.3) for 5 seconds to turn off the device.

Note: If the headset is not paired with a Bluetooth device for 3 minutes after powering on, or if it exceeds the effective connection distance and disconnects, it will automatically power off after 3 minutes.

Bluetooth Device Connection

1. First-time connection: Through the Bluetooth device settings, search for 'MINISO-G90' and tap to connect.
2. Reusing: The headset will automatically connect to the previously paired Bluetooth device.

Function Operation

• Pause/Play: Tap the multi-function power button (NO.3) once.
• Volume Up: Tap the '+' button (NO.1) once. A voice prompt will indicate when maximum volume is reached.
• Volume Down: Tap the '-' button (NO.2) once. A voice prompt will indicate when minimum volume is reached.
• Previous Song: Long press the '-' button (NO.2) for 2 seconds.
• Next Song: Long press the '+' button (NO.1) for 2 seconds.
• Call Answer/End: Tap the multi-function power button (NO.3) once.
• Call Rejection: Long press the multi-function power button (NO.3) for 2 seconds.
• Call Callback: Double click the multi-function power button (NO.3).
• Start Voice Assistant: Long press the multi-function power button (NO.3) for 2 seconds.
• ANC Noise Reduction: The default mode is on when powered on. Click the ANC button (NO.11) to activate/deactivate noise reduction mode.

Audio Wired Connection

Connect the earphones to your device using the 3.5mm audio cable (NO.13). In this mode, all button functions on the earphones are invalid; control must be done through the connected device.

Attention: When the audio cable is inserted while the headphones are on, they will automatically shut down. To turn them back on, the audio cable must be unplugged. The noise reduction function cannot be used in wired mode.

Charging Cable Connection

Connect the earphone to the charger using the Type-C charging cable (NO.14) for charging.

Dual Bluetooth Device Connection

To connect to two Bluetooth devices simultaneously, first connect to the first device. Then, disconnect and connect to the second Bluetooth device. Finally, reconnect the first Bluetooth device. The earphone can now be connected to both devices.

Indicator Light Display

• Power On: Red and blue lights flash alternately.
• Power Off: Red and blue lights flash rapidly alternately before turning off.
• Successful Pairing: Blue light flashes slowly.
• Bluetooth Disconnection: Red and blue lights flash alternately.
• ANC Noise Reduction Mode Enabled: Green light constantly on.
• Earphone Charging: Red light stays on. When fully charged, the red light turns to blue and stays on.

Display Screen Operation

Icon Introduction

☯ Bluetooth Status:

• Red status: Display screen is not connected to the headphones.
• White status: Display screen is connected to the headphones.

⚡ Charging Status Indicator Icon:

• Green: Charging in progress.
• White: Normal battery level, not charging.

Lighting Up the Display Screen

1. When the screen is off, click on the display screen to turn it on.
2. Press the multi-function button on the screen once, and the screen will light up.

Turn Off Display Screen

• Automatic shutdown: After 30 seconds of inactivity, the display screen will automatically turn off.
• Manual closing: Press the Charging Case multi-functional button once to turn off the display screen.

Note 1: First time use, please activate power on.
Method 1: Activate the display screen through the TYPE-C interface.
Method 2: Long press the multi-functional button on the display screen for 8 seconds to turn on the device.
Tip: This product defaults to shutdown mode when it leaves the factory. First use requires activation and startup.

Lock Screen Interface

To unlock the screen, slide to the right.

Music Interface

The music interface displays playback controls:

• ⏪ Previous Song
• ⏸ Play/Pause
• ⏭ Next Song

Volume Adjustment Interface

The volume adjustment interface allows control of audio output:

• − Reduce volume (minimum music volume is 0).
• + Increase volume (maximum music volume is 16).

ANC Interface

The ANC (Active Noise Cancellation) interface allows you to:

• Turn off ANC noise reduction.
• Enable ANC noise reduction.

Equalizer Interface

Switch between different EQ sound effects: Normal, Rock, Pop, Classic, Jazz.

Alarm Clock Interface

Set the alarm time with options for 5 minutes, 10 minutes, 30 minutes, and 60 minutes.

Brightness Setting Interface

Adjust screen brightness:

• Click the left button to decrease screen brightness.
• Click the button on the right to increase screen brightness.

Language Switch Interface

Click to switch between different languages.

Screen Lock Interface

Click to switch between different lock screen wallpapers. The current screen displays the selected lock screen wallpaper.

Flashlight Interface

Click the button to turn on the flashlight. The entire screen turns white, and the brightness of the screen increases.

Time Setting Interface

Automatic update: When the screen, headphones, and phone are connected, the time on the phone will be automatically updated to the charging case.

Manual update: Click the button to enter manual settings.

TikTok Page Flipping and Like Function

This function is only available for use with TikTok software; other software may not be compatible. This feature may also have compatibility issues with some phones.

• Clicking the heart icon will 'like' the current short video.
• Clicking the left arrow icon will switch to the previous short video.
• Clicking the right arrow icon will switch to the next short video.

Troubleshooting for iPhone users: If the Camera function or TikTok page flipping and like function cannot be used properly on an iPhone, enable the following settings: Open Apple Phone Settings → Accessibility → Touch → AssistiveTouch → AssistiveTouch ON. Then close and reopen the camera or TikTok software.

Photography Function

This function is only available for taking photos with the built-in camera app of the phone. Other shooting software may not be able to use it. This feature may have compatibility issues with some phones.

To use: Open the phone camera, then click the button on the headset to take photos.

Note: When not in shooting mode, clicking this photo button will increase the volume.

Important Notes:
1. This function is only available for taking photos with the built-in camera of the phone. Other shooting software may not be able to use it.
2. This feature may have compatibility issues with some phones, and some phones may not be able to use it.
3. If there are situations where it cannot be used, please ignore this feature.

FCC ID: 2BHJR-G90

FCC Warning:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

US Representative Contact:

Company name: REP America LLC
Address: 1942 Broadway St. STE 314C, Boulder, CO 80302, United States
Contact Person: Ben Xu
Email: d.zeng@rep-europe.de
Contact Phone: (719) 201-3314

Warranty Statement

MINISO Product Warranty Card

Warranty Policy

Disclaimer:

This manual does not come with any form of warranty, position expression or other implication. The products, specifications and information mentioned in this manual are for reference only, and the content will be updated on the website at any time without prior notice.

Warranty Statement:

The following guarantee is made for the products attached to this document: If the product is damaged due to quality defects under normal use within twelve (12) months from the date of purchase (the "Warranty Period"), and if it can be repaired, it will be repaired free of charge. If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge. The repaired product will continue to be covered by the warranty for the remaining warranty period (a minimum of not less than 30 days). The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen (13) months from the product production date.

To apply for warranty, call the product service hotline first and follow instructions. When applying for a warranty, provide a valid sales invoice that is accurate, complete, and clearly filled out.

The above guarantee does not apply to the following situations:

1. The validity period of the three guarantees has exceeded.
2. Altering of the warranty cards and product code do not match the product itself.
3. Failure or damages caused by misuse, abuse, improper transportation, use, maintenance, or storage.
4. Failure or damages caused by force majeure (such as earthquake, war, fire, etc.) or accident.
5. Zippers and tower buckles are damaged due to excessive force.
6. Off-line or tear caused by overloading.
7. Any damage caused by sharp objects.
8. Products with signs of burn damage or water logging.
9. Damage caused by unauthorized dismantling and modification.
10. Aging, discoloration, wear, cracking, and other losses that occur during normal use of the product.
11. If the product's original logo or label is changed or damaged, this warranty will be invalid.

The completeness and appearance of the product and accompanying materials are not covered by the warranty. Inspect the product on site when receiving it and raise objections to any discrepancies.

MINISO Product Service Policy

If a problem is encountered, contact customer service to solve it.

After-sales email: 7@hifi-earphone.com

Ⓒ ☯ RoHS CE

Guidelines for Safe and Effective Use

Read this information before using your Bluetooth headset. Unauthorized modifications will void the right to use the device's services.

Electromagnetic Interference:

• Electronic devices: To avoid electromagnetic interference or configuration incompatibility, turn off your Bluetooth device in areas with clear instructions.
• Civil Aviation: Turn off your Bluetooth headset according to flight attendant instructions after boarding a plane. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with aircraft communication systems.

Safety Matters:

• Placement: When not using the Bluetooth headset, place it where it will not be squeezed to prevent damage or personal injury.
• Children: Do not let children play with Bluetooth headsets. Some small parts are detachable and may be swallowed, posing a danger.

Important Safety Tips

• Except for operation methods specifically marked in the manual, do not attempt to disassemble or replace any parts in the product.
• This product contains a built-in rechargeable battery. It is prohibited to hit, squeeze, puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as sun, heaters, or stoves. After using the earphones, do not place them in a humid, dusty, oily smoke, steam, direct sunlight, or other high-temperature and high-pressure environments to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one. However, do not replace the battery yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type.
• After the product is used and scrapped, do not throw it into a fire. Waste should be disposed of in strict accordance with garbage classification. Use this product reasonably and correctly to avoid causing injuries and environmental damage.
• During the use of headphones, due to long distances, obstacles, or interference from other radio signals, Bluetooth signals, WIFI signals, etc., there may be occasional lags, voice out-of-sync, or disconnection when listening to music, watching videos, or playing games. If this happens, reconnect the headphones or move away from interference.
• When charging, use a charging device with an output voltage of DC 5V/1A. Choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may damage the battery. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.