UMIDIGI A13 Pro 5G

Product Overview

The UMIDIGI A13 Pro 5G is a smartphone designed for a premium user experience. Below is a description of its physical components.

Front View

The front of the device features a large touchscreen display. At the top center of the display is the 24MP front camera. Above the screen, the receiver is located, accompanied by a light/proximity sensor to its right. The top edge also houses Microphone 2. The bottom edge of the device includes a 3.5mm headphone jack, Microphone 1, a speaker, and a Type-C USB port.

Back View

The rear of the phone showcases a multi-camera system. The camera module includes a 48MP Main camera, a 16MP Super Wide Angle camera, and a 5MP Macro camera. Adjacent to the cameras are an Infrared Thermometer and a Dual-LED Flash. The side of the device features volume control buttons (Volume±) and a customizable button. The power button, which also functions as a fingerprint sensor, is located on the side.

Key Operations

Power Button

Functionality: Long press to turn the device on or off. When the device is on, a short press turns the screen on or off.

Volume Buttons

Functionality: Short press to adjust the volume or to mute incoming calls.

Card Insertion and Management

Nano-SIM Card Insertion

To insert a Nano-SIM card, face the chip side downwards into the slot. Ensure the orientation of the cut edge of the card aligns with the slot. It is recommended to use standard Nano-SIM cards. Avoid using hand-cut or non-standard cards to prevent damage to the SIM slot and card tray.

Diagrammatic representation: Two slots are shown, labeled 'Nano SIM1' and 'Nano SIM2'.

TF Card Installation

To install a TF (microSD) card, place the metal contacts downwards, aligning the cut edge with the tray. Place the card onto the tray and slide it into the device. It is advised to turn off the phone before changing or replacing the TF card. The TF card is not included and must be purchased separately. Do not plug or unplug the SIM card tray when the phone is on. Use caution with the slot thimble to avoid scratching the phone.

Diagrammatic representation: A tray is shown with slots for 'Nano SIM1' and 'TF Card'.

Dual-SIM Management

To manage dual SIM usage, navigate to Settings > SIM Card to select the main SIM for 4G network. You can also choose preferred network types (4G/3G/2G) via Settings > Network & Internet > Mobile network > Preferred network type.

Fingerprint Identification

You can unlock the screen using the fingerprint ID function. Navigate to Settings > Security & Location > Fingerprint and follow the on-screen instructions to set up your fingerprint.

Reminder: Ensure your finger is clean and dry for accurate fingerprint registration. Use the pad of your finger (fingertip). To unlock, place your finger pulp on the touch ID sensor for approximately one second.

Network Connection

Connecting WLAN

Go to Settings > Network & Internet > Wi-Fi. When Wi-Fi is enabled, a list of available connections will appear. Tap the desired network, enter the password if encrypted, and tap Connect. For public networks, simply tap Connect. The network is ready for use when it shows "connected".

Bluetooth Function

Navigate to Settings > Connected devices > Bluetooth. Enable Bluetooth by clicking the Menu Button and selecting "Refresh". The phone will scan for available Bluetooth devices. Tap the desired device to pair and then click "Pair" on the pop-up dialog. Documents can be transmitted after successful Bluetooth pairing.

Note: Swipe down the status bar twice to access shortcut switches for Bluetooth and other functions.

WLAN Hot-spot Setting

Go to Settings > Network & Internet > Hotspot & tethering > Wi-Fi hotspot to enable the portable WLAN Hot-spot function. During setup, enter your desired network name in "Network Name" and your password, then click Save. Other devices can connect to the hotspot by searching for it and entering the password.

Note: Enable Data Connection before activating the sharing function. Your mobile data will be shared, so use it carefully. The quality of the hotspot connection depends on signal strength and connected devices.

Camera

To take photos, aim the camera at the subject. The phone will autofocus automatically. Alternatively, tap the screen to select a focus point. Then, tap the "Capture" icon. You can also choose other modes such as video recording, beauty mode, and panorama.

Dual-SIM Dual Standby Technology

"Dual card, dual standby, single pass" means you can insert two SIM cards that are both in standby mode, but you cannot make phone calls simultaneously on both. During standby, both SIM cards can receive calls. However, if one card is activated (e.g., in a call), the other card will be deactivated for the duration of the call, making it unreachable.

Security Information

Security information related to third-party software installations and functions may vary by region or hardware specifications. UMIDIGI disclaims responsibility for performance issues or incompatibility caused by third-party applications, registry editing, or operating system modifications. Customizing the OS may lead to stability and functionality problems.

Avoid exposing the device and its battery to extreme cold or hot conditions, as this can cause deformation and reduce battery capacity and lifespan. Use only UMIDIGI-approved batteries and chargers; incompatible products may damage the device. Dispose of used batteries and phones according to local regulations.

Do not place the device or battery inside heating appliances like microwaves, ovens, or radiators, as the battery may explode if exposed to excessive heat. Do not crush or pierce the battery. Prevent excessive external pressure on the battery, which could cause short circuits or overheating.

Specifications