UMIDIGI G5 Smartphone: User Manual, Features, and Specifications

Product Overview: Buttons and Ports

This section details the physical buttons and ports of the UMIDIGI G5 smartphone.

Front View:

• 3.5 mm audio jack: For connecting headphones or external speakers.
• Front camera: For selfies and video calls.
• Receiver: Earpiece for calls.
• Microphone 2: Secondary microphone, likely for noise cancellation.
• Light/distance sensor: Automatically adjusts screen brightness and turns off the screen during calls.
• Display: The main touch-sensitive screen.

Bottom View:

• Microphone 1: Primary microphone for calls and audio recording.
• USB Type-C port: For charging and data transfer.
• Speaker: For audio output.

Side Views:

• SIM/TF card slot: For inserting SIM cards and a microSD card.
• 50MP Main camera: Primary rear camera.
• Depth sensor: Assists in portrait mode photography.
• Dual LED flash: Provides illumination for the rear cameras.
• Volume buttons: Adjust audio volume.
• Fingerprint sensor / Power key: Used for powering the device on/off and unlocking via fingerprint.

Button Functions:

Power Button: Press and hold to turn the device on. A short press when the device is on will turn the screen on or off.

Volume Buttons: Short presses adjust the volume. During an incoming call, a press silences the ringer.

SIM and Memory Card Installation

The UMIDIGI G5 supports Nano-SIM cards and microSD cards for expanded storage.

Nano-SIM Card Installation:

Insert the Nano-SIM card with the chip facing down. Align the cut corner of the card with the slot on the tray. Use only standard Nano-SIM cards; do not use manually cut cards as this may damage the SIM slot or the phone. Avoid repeatedly inserting and removing the SIM card.

TF Card (microSD) Installation:

Insert the TF card with the metal contacts facing down. Align the cut edge of the card with the slot. Turn off the phone before inserting or removing the TF card. The TF card is not included and must be purchased separately.

SIM Management:

Navigate to Settings > SIM Card to select the primary SIM card. In Settings > Network & Internet > Mobile Network > Preferred network type, choose your preferred network (e.g., 4G/3G/2G or LTE).

Network Connectivity

WLAN (Wi-Fi) Connection:

Go to Settings > Wi-Fi. A list of available Wi-Fi networks will appear. Select a network, enter the password if required, and tap Connect. For public networks, simply tap Connect. The status will indicate "Connected" when the connection is successful.

Bluetooth Connection:

Go to Settings > Bluetooth. Activate Bluetooth. Tap the Menu button and select "Refresh" to search for available Bluetooth devices. Tap a device to pair, then confirm the pairing in the pop-up. Once paired, you can transfer files. You can quickly toggle Bluetooth on/off by swiping down the status bar twice to access quick settings.

WLAN Hotspot:

Enable the Wi-Fi Hotspot feature in Settings > Network & Internet > Hotspot & Tethering > Wi-Fi Hotspot. Configure a network name and password. Other devices can connect to your hotspot by searching for the network name and entering the password. Ensure your mobile data connection is active before sharing your network. Use this feature cautiously as it consumes your mobile data.

Camera and Dual SIM Features

Camera Operation:

Point the camera at your subject for auto-focus. You can also tap the screen to select a focus point. Tap the capture icon to take a photo. The camera supports various modes including video recording, beauty mode, and panorama.

Dual SIM Standby:

The UMIDIGI G5 supports dual SIM dual standby, meaning two SIM cards can be active simultaneously for receiving calls. However, only one SIM card can be used for making calls or using mobile data at any given time. When one SIM is active for calls, the other enters a standby state and cannot make or receive calls.

Safety and Regulatory Information

General Safety Precautions:

• Avoid using or storing the device and battery in extreme temperatures (hot or cold) as this can deform the phone and reduce battery capacity and lifespan.
• Use only UMIDIGI-approved batteries and chargers. Incompatible accessories may damage the device.
• Dispose of batteries and phones according to local regulations.
• Do not place the battery or phone near heating devices like microwaves, ovens, or radiators, as the battery may explode.
• Do not crush, puncture, or apply excessive pressure to the battery, as this can cause internal short circuits and overheating.
• Customizing the operating system or using third-party applications may lead to performance issues or incompatibility.

FCC and ISEDC Compliance:

This device complies with Part 15 of the FCC Rules and applicable ISEDC standards. Operation is subject to two conditions: no harmful interference, and acceptance of any interference received. The device has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a technician.

RF Exposure Information (SAR):

SAR tests are conducted at the highest certified power level. The actual SAR level during operation may be lower. The device meets FCC/ISEDC RF exposure guidelines when used with approved accessories or with an accessory that maintains a minimum 10mm distance from the body.

EU Restrictions:

Operation of the 5150-5250 MHz frequency band is restricted to indoor use only in all EU member states.

E-label Access:

To access e-label information, navigate to Settings > About phone > Authentication information.

Technical Specifications

Box Contents

• 1x Phone
• 1x Screen protector (pre-applied)
• 1x Phone case
• 1x Type-C cable
• 1x Power adapter
• 1x SIM tray ejector
• 1x Quick start guide

Android is a trademark of Google LLC.

Manufacturer Information

Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd.

Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, Guangdong Province China.

FCC ID: 2ATZ4-G5AC

IC: 26074-G5AC

HVIN: G2239U-UF-V3GG