UMIDIGI PG2309GBA Smartphone Specifications

Specifications

Device Overview

The device features the following components:

• Infrared Light
• Ambient Light and Distance Sensor
• Front Camera
• SIM Slot
• Hotkey
• Audio Jack
• MIC 1
• MIC 2
• Speaker
• Type-C USB
• Main Camera
• Dual LED Flash
• Infrared Light
• Volume+
• Volume-
• Power Button & Fingerprint Sensor
• Infrared Front Camera
• Infrared Rear Camera

Safety Information and Warnings

Warning

The safety information (including SSL ES), and battery safety information for the installation of third-party software and functions may vary across different segments with different hardware specifications. UMIDIGI reserves the right to disclaim responsibility for performance issues or incompatibilities caused by third-party applications, registry editing, and operating system software modification. Customizing the SCI may cause the device or some applications to not function correctly.

Do not place the phone or battery near or inside heating appliances, control appliances, or high-pressure containers (such as ovens, microwaves, pressure cookers, electric ovens, computers, filters, and others), water heaters, gas stoves, etc. This could cause the battery to overheat, potentially leading to an explosion.

During charging, place the device in a well-ventilated area. The ambient temperature should be between 5°C and 35°C. The back cover should not be removed.

Backup and Restore

How to restart the phone: Press the power button to restart the UMIDIGI phone.

Backup and Restore:

1. Ensure both phones are connected to a Wi-Fi network and logged into a Google account.
2. On the old phone, navigate to "System" or "Backup" and ensure the "Backup to Google Drive" option is enabled. This creates a backup of your data.
3. On the new phone, during setup, even if connected to Google, select the option to restore from Google. Your applications, contacts, calendar events, and other settings should be found and restored automatically.

Transfer Cable: You can use a USB-C transfer cable to connect the old and new phones directly to transfer data.

Understanding Google Account Transfer Applications: Ensure your phone and battery are connected to the network. The Google network password is required to connect the phone and battery to the network.

EU Regulatory Information

E-label Information: To access the e-label information, navigate to Settings > About phone > Authentication information on the device.

Frequency Range:

• EGSM900: 880-915MHz(TX), 925-960MHz(RX)
• DCS1800: 1710-1785MHz(TX), 1805-1880MHz(RX)
• WCDMA 2100: 1920-1980MHz(TX), 2110-2170MHz(RX)
• WCDMA 900: 880-915MHz(TX), 925-960MHz(RX)
• LTE Band 1: 1920-1980MHz(TX), 2110-2170MHz(RX)
• LTE Band 3: 1710-1785MHz(TX), 1805-1880MHz(RX)
• LTE Band 8: 880-915MHz(TX), 925-960MHz(RX)
• LTE Band 28: 703-748MHz(TX), 758-803MHz(RX)
• LTE Band 40: 2300-2400MHz(TX/RX)
• NR FDD n1: 1920-1980MHz(TX), 2110-2170MHz(RX)
• EN-DC : DC_8A_n1A
• B8: 880-915MHz(TX), 925-960MHz(RX)
• n1: 1920-1980MHz(TX), 2110-2170MHz(RX)
• 2.4G Wi-Fi: 2412-2472MHz/2422-2462MHz(TX/RX)
• 5G Wi-Fi: 5150-5250MHz, 5725-5850MHz(TX/RX)
• Bluetooth/BLE 1M: 2402-2480MHz(TX/RX)
• BLE 2M: 2404-2478MHz(TX/RX)
• NFC: 13.56MHz(TX/RX)
• GPS L1 C/A, BDS B1I, GLONASS G1, Galileo E1: 1559-1610MHz(RX)
• FM: 87.5-108MHz(RX)

RF-Output Power:

• EGSM900: 34.87dBm(GMSK), 27.44dBm(8DPSK)
• DCS 1800: 31.86dBm(GMSK), 25.99dBm(8DPSK)
• WCDMA 2100: 23.44dBm
• WCDMA 900: 23.69dBm
• LTE Band 1: 23.5dBm
• LTE Band 3: 24.1dBm
• LTE Band 8: 24.1dBm
• LTE Band 28: 23.9dBm
• LTE Band 40: 23.9dBm
• NR FDD n1: 24.73dBm
• EN-DC: 24.79dBm
• 2.4G Wi-Fi: 17.81dBm
• 5G Wi-Fi: 5150-5250MHz: 15.66dBm, 5725-5850MHz: 13.94dBm
• Bluetooth: 5.82dBm
• BLE: 7.40dBm
• NFC: 24.48dBuA/m @ 3m