HALO BASSINEST® GLIDE SLEEPER – ASSEMBLY INSTRUCTIONS – IMPORTANT!

Please keep these instructions for future reference. Please read these instructions before assembly and use of this product. • Adult assembly required. • Tools not included.

WARNING

FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

Read and follow instructions before assembly and use. If you do not have instructions, DO NOT use this product. Call 1-888-999-HALO or visit www.Halosleep.com.
Before each use, inspect the HALO Bassinest® glide sleeper for damaged hardware, loose or missing components or sharp edges. DO NOT use the Bassinest glide sleeper if any parts are missing or broken. Contact or write HALO Innovations, Inc. for replacement parts and instructional literature if needed. DO NOT substitute parts.
Discontinue use of this product when the child is showing signs of being able to pull up, rollover, push up or sit up unassisted, or is able to move out of the security of the walled sleep area.
Never leave child unattended.
This product is not intended to be resold after use or returned to a retailer. Due to safety concerns, HALO Innovations, Inc. cannot be held responsible for any product that has been resold after use or returned to a retailer.

FALL HAZARD

To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached 20 pounds, whichever comes first. Always check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.

SUFFOCATION HAZARD–INFANTS HAVE SUFFOCATED:

In gaps between extra padding and side of the bassinet/cradle/crib.
On soft bedding.
Use only the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
NEVER place additional objects in the Bassinest glide sleeper.
ALWAYS ensure the pad is positioned correctly. Do not create any pockets between the pad and mesh sides.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
If a sheet is used with the pad, use only the one provided by the bassinet, crib or cradle manufacturer or one specifically designed to fit the dimension of the bassinest, crib or cradle mattress.
Never use plastic shipping bags or other plastic film as a mattress cover not sold or intended for that purpose. They can cause suffocation.
Discard all plastic packing materials immediately after opening.
Product is designed and is approved for use with one baby only. Do not use with more than one child at a time.

STRANGULATION HAZARD

Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a bassinet/crib/cradle or attach strings to toys.
DO NOT place the Bassinest glide sleeper near a window or patio door where cords from blinds or drapes can strangle an infant.

INJURY HAZARD

Never place more than one infant to sleep in the Bassinest glide sleeper.
Never carry the Bassinest glide sleeper with an infant in it.
Never use the Bassinest glide sleeper when infant sleep area is separated from its base.
Young children should not be allowed to play unsupervised in the vicinity of the Bassinest glide sleeper.
Always remove child from the Bassinest glide sleeper before adjusting height.
Always ensure that the Bassinest glide sleeper sleeping area is secure to its base before use.
The Bassinest glide sleeper should be placed on a horizontal floor.
Not for use in an automobile.
Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the Bassinest glide sleeper.
Do not place anything in the Bassinest glide sleeper to elevate the mattress. The American Academy of Pediatrics states that elevation can result in the infant sliding to the foot of the crib into a position that might compromise respiration and is therefore not recommended.
The base of this product is intended to be used with the provided glide sleeper top only. Do not attempt to use the base from the glide sleeper with the HALO swivel sleeper or HALO twin sleeper top.

Assembly Instructions

Remove contents from carton and discard all packaging. Contents: 2 side walls, 2 legs, curved base frame, upper base frame, sleep area, glide handle, 2 large screws, 4 small screws, 2 cap nuts, owner's manual, and registration card.
Start by assembling the base. Attach the two legs to the lower, curved base frame. Gliders on bottom of feet should be facing down. Line up the hole in the right leg, with the hole in the right side of the curved base frame. Repeat on left. The open holes in the curved base frame should be facing towards the legs.
Insert large screws through holes and secure with cap nuts.
Insert legs from the upper base frame into the legs of the lower base frame. Press the spring pin buttons in the legs of the upper base frame. Push the upper base frame into the lower base frame. You will hear a click when the spring pin engages and locks into place.
Next, attach the glide handle to the base frame. Squeeze the pins in the upper base frame and push glide handle into upper base frame. You will hear a click when parts are properly assembled and locked together. The assembled base looks like this. The glide handle should be level. If the handle is not level, verify that the open holes in curved base frame are facing towards the legs, as shown in step 2.
Assemble the sleep area by fully opening the top flaps and side panels to expose the railing poles. Start by attaching railing marked "A" into sidewall opening marked "A", and push together until spring pin engages. Repeat process with remaining railings and sidewall openings. Note that only one rail and sidewall connection will have a letter indicator. Railing clicks when properly assembled. Pull on railing to ensure it is properly locked in place.
To complete the setup of the sleep area, insert the sidewall into the opening in the sleep area base. Sidewall clicks when properly installed. Repeat on other side.
Fold fabric side panel around the sidewall. Fold fabric flap over the sidewall. Attach to fastener strip on side, bottom and top. Repeat on both sides.
Place the assembled sleep area on top of the glide handle. The sleep area should be placed horizontally on the glide handle with the HALO Bassinest® label on the back wall and the retractable wall closest to the handle. Pull back fabric on the base of the sleep area so that pre-drilled holes are visible. Line up the pre-drilled holes in the sleep area with the pre-drilled holes in the glide handle. Insert small screws and tighten with a #2 Phillips screwdriver. Close fabric flaps over sleep surface using fastener strips to secure.
Add mattress: Please wash sheet before use. Use only mattress and sheet especially designed for the Bassinest glide sleeper. DO NOT machine wash the mattress - instead wipe the surface with a damp cloth.

Use Instructions

To adjust height: Adjust height by pressing and holding the adjustment button and lifting the handle to one of the predetermined height positions. There are 4 height positions and each is indicated by notches in the upper base. The base will click into place when secure.

To unlock retractable wall: On both ends of the Bassinest glide, slide locking mechanisms out of sidewall notches as shown until front wall moves freely. It is not necessary to remove the fabric covering to access the locks. NOTE: If lock is difficult to use, lift up on retractable wall slightly and adjust lock as desired.

To lock retractable wall: On both ends of the Bassinest glide, slide locking mechanisms into sidewall notches as shown until front wall is immobilized.

To use retractable wall: Push down gently on front railing. Retractable wall automatically returns to its upright position when pressure is removed.

Use the glide handle beneath the sleep area to glide bassinest. DO NOT ATTEMPT TO GLIDE BASSINEST BY PUSHING OR PULLING ON THE FABRIC OF THE SLEEP AREA.

Care and Maintenance Instructions

Remove the sheet from the mattress and wash the sheet before use.
The sheet is machine washable. Machine wash in warm water with like colors/colours. Do not use bleach. Tumble dry on low setting.
The Bassinest glide sleeper base, sleep area and mattress should be cleaned regularly by using a mild cleaning solution and a damp cloth. Do not use bleach. Do not machine wash mattress. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Allow to dry completely before replacing sleep pad and/or use.
When not in use: clean unit as instructed. Store in a clean, dry location. Do not store outdoors or in a damp environment.
Do not attempt to unscrew the sleep surface board or remove the lining cover from the board. This is not meant to be disassembled.
If there is a large spill, spray a mixture of vinegar and water into the sides and wipe under the lining cover as much as you can until the spill or odor is gone. Let the top air dry before use.
Do not submerge the Bassinest sleep surface board or walls in water.

Warranty

The HALO Bassinest® glide sleeper is covered by a 1-year limited warranty. Visit www.halosleep.com/halo-bassinest-1-year-limited-warranty/ for details.

Customer Service

FOR RETURNS: Please contact your retailer.

FOR QUESTIONS, MISSING PARTS OR OTHER SERVICE ISSUES: Please contact HALO. Our friendly, specially trained support team will be happy to assist you with any concerns you may have regarding your new HALO Bassinest® glide sleeper.

United States and Canada

1-888-999-HALO

Email: customerservice@halosleep.com

United Kingdom

0845 6185954

Email: info@dcukltd.com

Australia

61 2 8402 4139

Email: enquiries@babybrands.com.au

HALO Innovations, Inc.

111 Cheshire Lane
Suite 100
Minnetonka, MN 55305
1-888-999-HALO

©2018 HALO Innovations, Inc. All rights reserved. "HALO," the HALO logo, "Bassinest" and HALO Bassinest logo design are trademarks or registered trademarks of Halo Innovations, Inc. in the U.S. and other countries. HALO products comply with all applicable government safety regulations and conform to the safety requirements of ASTM F2194. Patents pending. Made in China.

	HALO BassiNest Glide Sleeper Instruction Manual Comprehensive instruction manual for the HALO BassiNest Glide Sleeper, covering assembly, safety warnings, care, and maintenance.
	HALO Bassinest Glide Sleeper Instruction Manual Comprehensive instruction manual for the HALO Bassinest Glide Sleeper, covering assembly, usage, safety warnings, and care instructions. Includes multilingual support.
	HALO BassiNest Swivel Sleeper Instruction Manual Comprehensive instruction manual for the HALO BassiNest Swivel Sleeper, covering assembly, usage, safety warnings, and care instructions for both Essentia and Premiere models.
	HALO BassiNest Swivel Sleeper Instruction Manual Comprehensive instructions for assembling, using, and maintaining the HALO BassiNest Swivel Sleeper. Includes safety warnings, feature explanations, and care guidelines.
	Halo Bassinest Swivel Sleeper Instruction Manual Comprehensive instruction manual for the Halo Bassinest Swivel Sleeper, covering assembly, usage, safety warnings, and care instructions for various models including Essentia, Premiere, and Luxe Plus.
	HALO BassiNest Swivel Sleeper Instruction Manual Comprehensive instruction manual for the HALO BassiNest Swivel Sleeper, covering assembly, safety warnings, usage guidelines, and care instructions. Learn how to safely use and maintain your HALO BassiNest for your infant.
	Halo Bassinest Swivel Sleeper Instruction Manual Comprehensive instruction manual for the Halo Bassinest Swivel Sleeper, covering assembly, usage, safety warnings, and care instructions in English, French, and Spanish.
	HALO BassiNest Hospital Series 3957 Instruction Manual Comprehensive instruction manual for the HALO BassiNest Hospital Series swivel sleeper (Model 3957), covering safety, setup, operation, maintenance, and warranty.