XXXLutz MACKAY Table Assembly Instructions
Product Number: 16340043/01
Manufacturer: XXXLutz KG
Address: Roemerstrasse 39, AT-4600 Wels Austria
Email: Info@xxxlutz.at
Product: MACKAY Table
This document provides assembly instructions for the MACKAY table by XXXLutz KG.
Maximum Load Capacity: 60kg
[!] Ensure all parts are present before assembly.
[!] Do not overtighten screws.
Parts List
- A: Tabletop (x1)
- B: Table Leg (x4)
- C: Screw M8*20mm (x16)
- D: Washer M8*18 (x16)
- E: Allen Key (x1)
Assembly Steps
Step 1
Attach the legs (B) to the underside of the tabletop (A) using screws (C) and washers (D). Insert screws through the washers, then through the pre-drilled holes in the legs, and into the tabletop.
Use the provided Allen key (E) to tighten the screws.
Repeat for all four legs.
Step 2
Ensure all legs are securely fastened and the table is stable.
The MACKAY table is now assembled.
