XXXLutz Table Assembly Instructions

Parts List

• 1 x Table Top (Part 1)
• 2 x Support Legs (Part 3)
• 1 x Base Plate (Part 2)
• 4 x Connecting Rods (Part 4)
• 1 x Allen Key (Part 5)
• 16 x Screws (M8x25mm) (Part 9)
• 4 x Screws (M8x35mm) (Part 8)
• 4 x Washers (020x010x2mm) (Part 6)
• 4 x Nuts (Part 7)

Assembly Steps

1. Attach the support legs (Part 3) to the base plate (Part 2) using screws (Part 9) and washers (Part 6). Ensure a secure fit.
2. Connect the support legs (Part 3) together using the connecting rods (Part 4) and screws (Part 9).
3. Attach the table top (Part 1) to the assembled base and leg structure.
4. Secure the table top using screws (Part 8) and nuts (Part 7).
5. Refer to the diagrams for detailed visual guidance on screw placement and tightening (indicated by 50% and 100% tightening symbols).
6. Extending the Table: To extend the table, unlock the locking mechanism by turning the handle. Pull the table sections apart. Insert the extension leaf. Push the table sections back together and re-lock the mechanism. Ensure the locking mechanism is securely engaged before use.
7. Adjusting Levelers: If the table is uneven, adjust the levelers on the bottom of the legs to stabilize it.

Usage and Care

• Maximum weight capacity for the table is 40kg on one side and 60kg on the other when extended.
• Ensure all screws are tightened before use.
• When moving the table, lift it from the base to avoid damaging the legs or top. Two people are recommended for moving.
• Clean with a damp cloth. Avoid harsh chemicals.

Diagram Descriptions

• Page 1: Shows the parts list with quantities and the initial steps of attaching legs to the base.
• Page 2: Continues the assembly process, showing how to connect the legs and attach the tabletop.
• Page 3 & 4: Illustrate the mechanism for extending and retracting the table, including locking and unlocking procedures.
• Page 5: Depicts the final placement of the table, advice on moving the table (two-person lift recommended), and weight capacity indicators.