XXXLutz MACKAY Chair Assembly Instructions
Manufacturer: XXXLutz KG
Address: Roemerstrasse 39, AT-4600 Wels Austria
Email: Info@xxxlutz.at
Product Code: 16340043/01-02
Product Overview
This document provides assembly instructions for the MACKAY chair by XXXLutz.
Maximum Load Capacity: 120kg ⚖️
Assembly Time: Approximately [clock emoji] (estimated)
Important: Please follow all instructions carefully to ensure safe and correct assembly. Do not overtighten screws. [warning emoji]
Safety Precautions:
- Do not stand on the chair. [person standing on chair crossed out emoji]
- Do not use the chair as a step ladder. [chair as step ladder crossed out emoji]
- Ensure all parts are securely fastened before use. ✔️
Parts List
| Identifier | Description | Quantity | Details |
|---|---|---|---|
| A | Chair Seat/Back Assembly | x1 | [chair base] |
| B | Chair Leg Assembly | x1 | [chair legs] |
| C | Screws | x4 | M6*35mm [screw emoji] |
| D | Washers | x4 | [washer emoji] |
| E | Allen Key | x1 | [allen key emoji] |
Assembly Steps
Step 1: Attach Legs to Seat
Align the chair leg assembly (B) with the designated mounting points on the underside of the chair seat/back assembly (A). Insert screws (C) through washers (D) and into the pre-drilled holes. Use the Allen key (E) to tighten the screws.
Parts Used: A, B, C (x4), D (x4), E
Visual Aid: The diagram shows the underside of the chair with the legs being attached using screws and washers. The Allen key is shown for tightening.
Step 2: Final Check
Ensure all screws are securely tightened. The chair is now assembled and ready for use.
Visual Aid: The diagram shows the fully assembled MACKAY chair.
