XXXLutz Coffee Table Assembly Instructions

Model: 11250001-01/02/03

Manufacturer: XXXLutz KG

Address: Roemerstrasse 39, AT-4600 Wels

Product Overview

This document provides instructions for assembling a XXXLutz coffee table. The table features a glass top and a wooden frame. Estimated assembly time is 10 minutes. The maximum weight capacity is 30kg.

Visual Description of the Table: The assembled coffee table has a rectangular glass top supported by four wooden legs. The legs are connected by a lower shelf. The design is modern and minimalist.

Parts List

Please check that all parts are present before starting assembly.

1. Glass Top: 1 piece (1000x600x8mm)
2. Lower Shelf: 1 piece (900x450x5mm)
3. Side Frames: 2 pieces (550x330x120mm)
4. Support Rods: 8 pieces (Ø50x100mm)
A. Long Screws: 4 pieces (M8x245mm)
B. Washers: 4 pieces (Ø8x22mm)
C. Plastic Sleeves: 4 pieces (Ø8x22mm)
D. Short Screws: 4 pieces (M8)
E. Cylindrical Connectors: 12 pieces (Ø50)
F. Allen Key: 1 piece

Assembly Steps

Step 1

Attach 4 cylindrical connectors (E) to the underside of the glass top (1) using 4 long screws (A), 4 washers (B), and 4 plastic sleeves (C). Insert the screws through the holes in the glass top, then through the plastic sleeves and washers, and finally into the cylindrical connectors. Tighten with the provided Allen key (F).

Diagram Description: The diagram shows the underside of the glass top (1) with four holes. Four cylindrical connectors (E) are positioned over these holes. Long screws (A) are shown passing through washers (B) and plastic sleeves (C) into the connectors.

Step 2

Attach the two side frames (3) to the lower shelf (2). Each side frame has pre-drilled holes that align with corresponding holes on the lower shelf. Insert screws (not specified in parts list for this step, assumed to be part of component 3 or pre-attached) and tighten.

Diagram Description: The diagram shows the lower shelf (2) with two U-shaped side frames (3) being attached to its edges. The side frames are oriented vertically.

Step 3

Place the assembled side frames and lower shelf onto the glass top assembly from Step 1. Align the holes in the side frames with the remaining cylindrical connectors (E) on the glass top. Insert 8 short screws (D) through the side frames and into the cylindrical connectors. Tighten with the Allen key (F).

Diagram Description: The diagram shows the structure from Step 2 placed on top of the structure from Step 1. Short screws (D) are shown being inserted through the upper part of the side frames (3) into the cylindrical connectors (E) attached to the glass top.

Step 4

Secure the glass top (2) to the assembled frame. Insert the remaining 4 cylindrical connectors (E) into the designated holes on the underside of the lower shelf (2). Then, insert 4 short screws (D) through the lower shelf and into the cylindrical connectors. Tighten with the Allen key (F).

Diagram Description: The diagram shows the underside of the lower shelf (2). Four cylindrical connectors (E) are inserted into holes on the shelf. Short screws (D) are shown being inserted through the shelf into these connectors.

	Assembly Manual for Round Solid Mango Wood Coffee Table Comprehensive guide for assembling and maintaining your round solid mango wood coffee table. Includes important information, warnings, tool requirements, and care tips.
	Assembly Instructions for XXXLutz Table Model 00690063/01 Detailed assembly instructions and usage guidelines for the XXXLutz table, model 00690063/01, including part lists, assembly steps, and weight capacity information.
	XXXLutz Cylinder Side Table Assembly Instructions Assembly instructions for the XXXLutz cylinder side table, including part identification and assembly steps. Features two cylindrical tables with dimensions Ø380320 and Ø480380, with a maximum weight capacity of 30kg.
	Elian Table Assembly Instructions Assembly instructions for the Elian table from XXXLutz, including parts list and step-by-step guidance.
	XXXLutz MACKAY Table Assembly Instructions Assembly instructions for the XXXLutz MACKAY table, including parts list and step-by-step visual guide. Learn how to assemble your MACKAY table with provided hardware.
	Matteo Chair Assembly Instructions Assembly instructions for the Matteo chair by XXXLutz KG. Includes parts list and step-by-step guidance.
	WANDA Bar Stool Assembly Instructions Assembly instructions for the WANDA bar stool (model 23810420-01/02/03) by XXXLutz KG. Includes parts list and step-by-step assembly guide.
	XXXLutz Shelving Unit Assembly Instructions \| Model 05370058/01 Step-by-step assembly guide for the XXXLutz shelving unit, model number 05370058/01. Includes a detailed parts list and instructions for building the unit.