XXXLutz Shelving Unit Assembly Instructions
Model Number: 05370058/01
Manufacturer: XXXLutz KG, Roemerstrasse 39, AT-4600 Wels
Parts List
- Part A: Shelf (x4)
- Part B: Vertical Pole (x4)
- Part C: Connector (x4)
- Part D: Vertical Pole (x4)
- Part E: Cap/Foot (x32)
- Part F: Fastener (x4)
- Part G: Screw (x2)
- Part H: [Part H - Usage not clearly depicted in assembly] (x4)
Note: Quantities are indicated in parentheses.
Assembly Steps
Step 1: Prepare Shelves
Take four (4) Part A shelves. Attach four (4) Part F fasteners to the underside of each shelf. [Diagram shows Part A shelf with four Part F fasteners being inserted into pre-drilled holes or slots on the corners.]
Step 2: Attach Vertical Poles to First Shelf
Take one (1) Part A shelf (prepared in Step 1). Insert four (4) Part B vertical poles into the corresponding holes on the underside of the shelf. [Diagram shows Part B poles being pushed into the corner sockets of Part A.]
Step 3: Add Connectors
Insert four (4) Part C connectors onto the top ends of the Part B poles. [Diagram shows Part C being pushed onto the top of Part B poles.]
Step 4: Add Second Shelf
Place another Part A shelf onto the Part C connectors. Ensure it sits securely. [Diagram shows a second Part A shelf being placed on top of the assembled structure.]
Step 5: Continue Building Upwards
Repeat Steps 2 and 3 to add more vertical poles (Part B) and connectors (Part C) for the next shelf. Then, place another Part A shelf on top. Continue this process until all four shelves are assembled. [Diagram shows the structure growing upwards with shelves and poles.]
Step 6: Attach Feet/Caps
At the bottom of the unit, insert thirty-two (32) Part E caps/feet into the ends of the vertical poles. [Diagram shows Part E being pushed into the bottom of the poles. The 'Ex8' label indicates 8 caps per pole, totaling 32 for 4 poles.]
Step 7: Secure Shelves (Optional/If applicable)
If provided, use two (2) Part G screws to further secure the shelves to the poles. [Diagram shows Part G screws being driven into designated points. The 'Gx2' label suggests 2 screws are used in total for this step.] The diagram also shows icons for drilling (❌), screwdriver (?), hammer (?), and pliers (?️), indicating potential tools or methods, but the primary assembly seems to be push-fit and screws.
Step 8: Final Check
Ensure all parts are securely fitted and the unit is stable. [Diagram shows the completed shelving unit.]
