Elian Table Assembly Instructions
XXXLutz KG
Roemerstrasse 39
AT-4600 Wels Austria
E-Mail: Info@xxxlutz.at
Product Overview
This document provides assembly instructions for the Elian table. The table has a maximum weight capacity of 60kg.
Parts List:
- 1x Folding mechanism frame (Ax1)
- 16x Screws M8*16mm (Bx16)
- 2x Table legs (Cx2)
- 16x Screws M6*16mm (Dx16)
- 8x Nuts M8
Tools Required:
- Allen key (included)
- Nut driver (not included)
Assembly Steps
Step 1: Attach Legs to Frame
Attach the two table legs (C) to the folding mechanism frame (A) using the M8*16mm screws (B) and the provided Allen key. Ensure the legs are securely fastened.
Step 2: Secure Legs with Nuts
From the underside of the frame, use the M8 nuts to further secure the legs. Tighten them using a nut driver.
Step 3: Extend and Lock Tabletop
The table features an extendable top. To extend, pull the sections outwards as indicated by the arrows. To lock the extended sections in place, engage the locking mechanisms on the underside of the tabletop. The diagrams show a 'lock' and 'open' action for these mechanisms.
Step 4: Folding and Unfolding
The table can be folded for storage or transport. The diagrams illustrate the process of unfolding the tabletop sections and then folding them back down.
Important Safety Information:
- Do not exceed the maximum weight capacity of 60kg.
- Ensure all screws and nuts are tightened before use.
- Keep small parts away from children during assembly.
