HEKTAR Ceiling Lamp
This document provides comprehensive guidance for the HEKTAR household ceiling mounted lamp, covering its assembly, connection, operation, transportation, storage, and disposal. Please read this manual carefully before using the unit and keep it until the end of the product's operation.
Safety Information
⚠ WARNING: ALTERNATING CURRENT VOLTAGE OF 220V IS POTENTIALLY LETHAL!
- All works on assembly and installation of the lamp should be performed only with a disconnected power supply.
- It is prohibited to use the lamp in a very humid environment (e.g., bathroom).
- Using bulbs with higher capacity or of a different structure than indicated in the user manual and on the lamp's marking may cause the lamp to stop working and result in the loss of the right for warranty service.
- Clean the lamp with a soft dry cloth. Do not use chemically active or aggressive cleaning agents.
General Information
The product was designed for general use in indoor spaces. The product is certified.
Technical Features
| Feature | Specification |
|---|---|
| Source voltage (alternating current) | 110-240 V |
| Network power frequency | 50-60 Hz |
| Maximal total capacity of the lamp | 7 W |
| Lamp voltage (Sold without light source) | 220-240 V |
| Bulb socket type | GU10 |
| Maximum capacity of the bulb (Sold without light source) | 7 W |
| Number of bulbs | 3 pcs. |
| Operating temperature | +5 to +40 °C |
| Relative humidity (not exceeding) | 80 % |
| Product's protection rating | IP20 |
| Material | Steel, Plastic |
| Service Life | 10 years |
How to Use
Inspect the product to ensure the integrity of the plug, power cord, and lamp. Put the bulb into the lamp. Insert the plug into the socket.
Maintenance
To replace the bulb:
- Disconnect the lamp from the power supply network.
- Allow the bulb and lamp case time to cool down.
- Make sure that the replacement bulb suits the lamp in terms of type and capacity.
- Remove the old bulb and install the new bulb.
Transportation and Storage
The product should be transported and stored in its package, complying with safety precautions to avoid mechanical damage and exposure to atmospheric precipitation.
Disposal
The product should be disposed of in compliance with local legal requirements.
🗑 The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Probable Malfunctions and Methods for Remedy
⚠ Important! All works targeted at the remedy of possible malfunction of the product should be performed only with a disconnected power supply!
| Problem | Possible Solutions |
|---|---|
| The lamp doesn't work |
|
If these methods were of no use, contact qualified specialists.
Product Data
| Product Name | HEKTAR |
|---|---|
| Product Type | Household Ceiling Lamp |
| Product Model or Art.nr | Typ S1401F HEKTAR |
| Trademark | IKEA |
| Country of Origin | China |
| Manufacturer | IKEA of Sweden AB |
| Address | Box 702, ÄLMHULT, S-343 81, Sweden |
| Regarding Quality / Contact Seller | LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1. Via website: www.IKEA.ru Phone: 8 (800) 234-55-66 Or contact the IKEA Service department in any IKEA store. |
| Importer | LLC “IKEA TORG”, bld. 1, microraion IKEA, Khimki, Moscow region, 141400 Russia. Tel.: +7 (495) 737-5301, Fax: +7 (495) 737-5324. |
| Manufacture Date | Specified in the format DD.MM.YY on the label or package. |
Installation Steps
Step 1: Prepare the Lamp Body
Attach the mounting bracket to the main lamp body using 4 screws. Ensure it is securely fastened.
Step 2: Route Power Cable and Secure Cover
Feed the power cable through the designated opening in the cover plate. Attach the cover plate to the lamp body using 2 screws.
Step 3: Mount Ceiling Bracket
Mount the ceiling bracket to the mounting surface using appropriate fixings (screws and anchors, not supplied, should be chosen based on the wall material). The diagram shows rotating fasteners to secure the bracket.
Step 4: Feed Cable Through Bracket
Pass the power cable through the central opening of the mounted ceiling bracket.
Step 5: Connect Wiring
Open the terminal block. Connect the power supply wires (Live 'L', Neutral 'N') to the corresponding terminals. Ensure secure connections. The diagram shows connecting wires to terminals labeled 'L' and 'N'.
Step 6: Attach Lamp Body to Bracket
Attach the main lamp body to the ceiling bracket and secure it with 2 screws. Ensure the wiring is neatly tucked away.
Step 7: Attach Lamp Heads
Attach each of the three lamp heads to the track, securing each with 4 screws.
Bulb Replacement
📄 When changing bulbs: Use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.
