V720 Cloud Video Surveillance Mini Camera User's Manual

Client Downloading

Scan the QR code provided to download and install the "v720" app. Alternatively, search for "V720" in your mobile phone's application store to download and install it.

Adding a Device

1. Open the "v720" app and click the "+" icon in the upper right corner of the page to start the binding process.
2. Select or enter the WiFi account you wish to use and fill in the password.
3. Turn on and reset the device according to the on-screen guidance. The blue indicator light will flash quickly.
4. Wait until the device is bound successfully. The blue indicator light will remain steadily on. (Tip: Ensure the network is unblocked and the camera is powered on normally during connection. The blue indicator flashes quickly when connecting, and stays solid blue upon successful connection.)

Device connecting...

Keep the device as close as possible to the router.

AP Mode

1. On your mobile phone, turn on Wi-Fi and connect to the network named "NAX_".
2. Return to the "v720" app and refresh the dropdown list. When the device appears, it signifies a successful short-range mode connection.

Matters Needing Attention

• The applicable working temperature for this product is -10°C to 50°C. Do not use this product in environments with extreme temperatures.
• This product is a precision electronic device. Avoid using it in excessively wet environments or where water may enter the product.
• To ensure optimal performance, avoid positioning the lens close to glass, white walls, or other reflective surfaces, as this may cause bright close-up areas and dark or washed-out distant areas in the image.
• Ensure the product is installed within Wi-Fi signal coverage, preferably in a location with a strong signal. Keep it away from microwave ovens or other devices that may interfere with the signal.

Information to User

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.