Mini Video Camera Setup Guide with v720 App

Download the v720 App

Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.

Scan the QR code below to download and install the "v720" app, or search for "V720" in your mobile phone application store to download and install.

[QR Code for v720 App Download]

Connect to Wi-Fi

Follow these steps to connect your device to your Wi-Fi network:

1. App Interface: The app displays a "Welcome" screen prompting you to select the Wi-Fi used by the device. It notes that the device does not support 5G Wi-Fi.

   Please select the Wi-Fi used by the device. Note: The device does not support 5G WiFi.

2. Enter your Wi-Fi account (SSID).

   Please enter your Wi-Fi account.

3. Enter your Wi-Fi password.

   Please enter your Wi-Fi password.

4. Device Status: The device shows "Device connecting..." with a tip to keep it as close as possible to the router.

   Keep the device as close as possible to the router.

5. Mobile Phone Wi-Fi Setup: Turn on your mobile phone's Wi-Fi and connect to the device's Wi-Fi network (e.g., "v720-XXXXXX").

   Mobile phone turn on the WIFI and connect to the WIFI.

6. App Refresh: Return to the "v720" app and refresh the dropdown list. When the device name appears, the short-range mode connection is successful.

   Return to the "v720" app and refresh dropdownlist, when the device displays that means the short-range mode connection is successful.

Bind Your Device

Complete the device binding process:

1. Open the "v720" app and click the "+" icon in the upper right corner to start the binding process.
2. Select or enter your Wi-Fi account and fill in the password.
3. Turn on the device. The blue indicator light will flash quickly.
4. Wait for the device to bind successfully. The blue indicator light will become steady.

Tip: During connection, ensure the network is unblocked and the camera is turned on normally. A quickly flashing blue indicator indicates connection mode; a steady blue indicator signifies a successful connection.

Matters Needing Attention

• The applicable working temperature for this product is -10°C to 50°C. Please do not use this product in environments with temperatures that are too high or too low.
• This product is a precision electronic product. Please do not use it in excessively wet environments or where water may enter the product.
• To better use this product, please avoid placing the lens directly facing glass, white walls, or other reflective objects. This can cause the picture to be bright near and dark in the distance, or appear whitish.
• Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with a better Wi-Fi signal. Try to install it far away from microwave ovens or other locations that may affect the signal.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

RF Exposure Statement: To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.