Surveillance Cameras User's Manual

Client Downloading

Please scan the lower (right) QR code to download and install the "v720" app. Alternatively, search for "V720" in your mobile phone's application store to download and install.

[QR code for v720 app download]

Add Device

Step 1: Start Binding

Open the "v720" app and click the "+" icon in the upper right corner of the page to begin the binding process.

[App screen showing the '+' button in the upper right corner to add a device]

Step 2: Device Reset

Turn on and reset the device as instructed below. Upon successful reset, the blue indicator light will flash quickly. Click "Next" when finished.

Device Components:

• Front: [Camera lens area]
• Back: [Device back panel]
• Buttons:
  • ON/OFF button: Press to power on the device.
  • MODE button: Press and hold to reset the device.
• Ports:
  • Charging port
  • SD card slot
• Indicator light

Step 3: WiFi Connection

Select or enter the WiFi account you wish to use and input the password. Please note that the device does not currently support WiFi in the 5G band.

[App screen showing WiFi account and password input fields]

Step 4: Device Binding

Wait for the device to be bound successfully.

[App screen indicating 'Add complete']

AP Mode

Step 1: Activate AP Mode

Press and hold the MODE button until the camera's blue indicator light flashes quickly, then release the button.

Step 2: Connect Phone to Camera Hotspot

On your mobile phone, turn on Wi-Fi and connect to the Wi-Fi hotspot that starts with "NAX_".

[Mobile phone's Wi-Fi settings screen showing connection to 'NAX_10A9FF00016C']

Step 3: Refresh App

Return to the "v720" app and refresh the dropdown list. When the device displays "局域网在线" (LAN Online), the short-range mode connection is successful.

[App screen showing '局域网在线' (LAN Online) status]

Installation Guide

This section provides guidance on installing the device.

[Image of the mini camera unit]

[Image of the camera base/mount]

Matters Needing Attention

• The applicable working temperature for this product is between -10°C and 50°C. Please avoid using the product in environments with extreme temperatures.
• This product is a precision electronic device. Do not use it in excessively wet environments or where water may enter the product.
• For optimal performance, avoid positioning the front of the lens close to glass, white walls, or other reflective surfaces. This can lead to images that are bright in the foreground and dark in the background, or appear washed out.
• Ensure this product is installed within the range of Wi-Fi signal coverage, preferably in a location with a strong Wi-Fi signal. Try to install it far from microwave ovens or other potential sources of signal interference.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.