High-Definition Network Camera User Manual

Client Downloading

Scan the QR code to download and install the "V720" app, or search for "V720" in your mobile phone's application store to download and install.

[QR Code for V720 App Download]

Add Device

Follow these steps to add your device:

1. Open the "V720" app and click the "+" icon in the upper right corner to start the binding process.
2. Reset the device by pressing and holding the MODE button until the blue indicator light flashes quickly. Click "Next" when finished.
3. Connect your mobile phone's Wi-Fi to the hotspot starting with "NAX_".
4. Select or enter your Wi-Fi account and password. The device does not support 5G band Wi-Fi.
5. Wait for the device to be bound successfully. A successful connection will be indicated by the device appearing in the app after a dropdown refresh.

Device Function Explanation

Front:

• Power/On-Off Button
• Indicator Light

Back:

• Charging Port
• SD Card Slot
• Reset Button

AP Mode

To connect using AP mode:

1. Press and hold the MODE button until the camera's blue indicator light flashes quickly.
2. Connect your mobile phone's Wi-Fi to the hotspot starting with "NAX_".
3. Return to the "V720" app and refresh the page. The device should appear, indicating a successful short-range mode connection.

Matters Needing Attention

1. Operating temperature: -10°C to 50°C. Avoid extreme temperatures.
2. This is a precision electronic product. Avoid excessively wet environments or situations where water may enter the device.
3. To ensure optimal performance, avoid placing the lens close to reflective surfaces like glass or white walls, which can cause image distortion (bright foreground, dark background, or washed-out appearance).
4. Ensure the device is installed within Wi-Fi signal coverage and in a location with a strong signal. Keep it away from devices like microwave ovens that may interfere with the signal.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.