High-Definition Network Camera User's Manual

Client Downloading

Please scan the QR code to download and install the "v720" app from your mobile phone's application store, or search for "V720" and install it.

[QR code for v720 app download]

Add Device

Method 1: Binding Process

1. Open the "v720" app and click the "+" icon in the upper right corner of the page to start the binding process.
2. Select or enter the WiFi account you want to use and fill in the password. Note: The device does not currently support 5G band WiFi.
3. Wait for the device to be bound successfully.

Method 2: AP Mode

1. Press and hold the mode button until the camera's blue indicator flashes quickly, then release it.
2. Turn on and reset the device according to the instructions below. When the reset is successful, the blue indicator flashes quickly. Click "Next" when finished.
3. Turn on your mobile phone's WiFi and connect to the WiFi hotspot starting with "NAX_".
4. Return to the "v720" app and refresh the dropdown list. When the device displays, it means the short-range mode connection is successful.

Device Function Explanation

Front:

• ON/OFF Button: Press to power on.
• Indicator Light

Back:

• Reset Button: Press and hold the MODE button to reset the device.
• Charging Port
• SD Card Slot

Installation Guide

[Diagram showing camera components and their locations: front, back, ON/OFF button, reset button, charging port, SD card slot, indicator light]

Matters Needing Attention

1. The applicable working temperature of this product is -10°C to 50°C. Please do not use this product in environments with excessively high or low temperatures.
2. This product is a precision electronic product. Please do not use it in excessively wet environments or where water may enter the product.
3. To ensure optimal performance, avoid placing the lens close to glass, white walls, or other reflective objects to prevent issues like bright close-up areas and dark distant areas, or a washed-out appearance.
4. Ensure the product is installed within Wi-Fi signal coverage, preferably in a location with a strong signal. Keep it away from microwave ovens or other devices that might interfere with the signal.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.