CCT Remote Control
Model: C3
Product Features
- 2.4GHz wireless transmission technology: fast transmission speed, good stability, strong anti-interference.
- Supports matching multiple devices: can control multiple devices simultaneously.
- Adjusts CCT (Correlated Color Temperature) and brightness of light source/fixture.
- Supports MiBoxer/Mi-Light 2.4G series controllers and light fixtures.
- Control distance: 30 meters.
- Magnetic installation.
- Applicable for smart control in commercial lighting, hotel lighting, and home lighting.
Product Parameters
| Product Name: | CCT Remote Control |
| Model: | C3 |
| Working Voltage: | 3V (AAA*2PCS) |
| Standby Power Consumption: | 15 μA |
| Transmitting Power: | 6 dBm |
| Communication Protocol: | 2.4 GHz RF |
| Modulation Method: | GFSK |
| Control Distance: | 30 meters |
| Working Temperature: | -10-40°C |
| EMC Standard (EMC): | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.3.2 |
| Safety Standard (LVD): | EN 61347-2-11:2001+A1: 2019 EN 61347-1: 2015+A1:2021 EN 62493:2015+A1:2022 |
| Radio Equipment (RED): | ETSI EN 300 400 V2.2.1 |
| Certifications: | CE, EMC, LVD, RED |
Remote Control Base
Diagram showing the dimensions of the remote control base: 140mm height, 86.5mm width, 37.5mm depth. Another diagram shows a smaller base with dimensions 15mm x 40mm x 7mm.
Function Description
The remote features a touch-sensitive strip for controlling brightness and color temperature, and ON/OFF buttons.
Adjusting Light Fixture/Source Brightness
The indicator light is red. Slide along the corresponding color area to change the brightness of the light.
Adjusting Light Fixture/Source Color Temperature
When the light is on, press the ON button again briefly. The indicator light turns orange, switching to color temperature adjustment mode. Slide along the corresponding brightness area to change the light's color temperature.
Diagram illustrating the touch control strip and ON/OFF buttons on the remote. Labels indicate "Brightness/Color Temperature Control Touch Strip", "ON", and "OFF".
Pairing/Clearing Instructions with Light Fixtures
Pairing Instructions
Note: The remote must be paired with the light fixture before it can control the fixture.
Steps:
- Turn off the power to the light fixture, wait 10 seconds, then turn it back on.
- Within 3 seconds, short press the "ON" button on the remote 3 times.
- The light fixture will slowly flash 3 times, indicating successful pairing.
If the light does not flash, pairing has failed. Please repeat the above steps.
Clearing Instructions
Note: If the light does not flash, clearing has failed. Please repeat the above steps. (Note: Light fixtures that are not paired do not require clearing.)
Diagrams illustrate the pairing and clearing process: Step 1 shows power connected to a light fixture. Step 2 shows the remote with a label pointing to the "Pair/Clear" button. Step 3 shows power connected to the light fixture, indicating successful pairing with flashing lights.
Installation Instructions
Diagrams show the installation process for the remote control base. Step 1 shows peeling the adhesive backing from the remote base. Step 2 shows attaching the base to a wall and then magnetically attaching the remote to the base.
Precautions
- This remote control is designed for MiBoxer/Mi-Light 2.4G series controllers. Please refer to the product manual for compatibility information.
- This remote control is a precision electronic product. Avoid using it in humid or high-temperature environments for extended periods. If not in use for a long time, please remove the batteries and store them in a dry, anti-static environment.
- Do not use the remote control in areas with large metal objects or strong electromagnetic waves nearby, as this can significantly affect the control distance.
