YITAHOME DGJH-V1 Bookshelf Assembly Instructions
Important Notice
Notice:
- Follow the installation instructions carefully. Please confirm all accessories are present before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, please contact YITAHOME customer service.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | M5*35mm screw | x 8 |
| B | Ø15*10mm screw | x 8 |
| C | Ø5*48mm screw | x 46 |
| D | Ø3.5*14mm screw | x 10 |
| E | Ø6*30mm screw | x 12 |
| F | Ø3.5*12mm screw | x 2 |
| G | Bracket | x 1 |
| H | Screw | x 1 |
| I | Screw | x 1 |
| J | Screw | x 1 |
| K | Screw | x 1 |
| L | Thread Cover | x 1 |
| M | M6*35mm screw | x 5 |
| N | M4*22mm screw | x 1 |
| O | Screw | x 4 |
| P | Screw | x 4 |
| Q | Screw | x 4 |
| R | Bracket | x 4 |
| S | Screw | x 4 |
| T | Nylon Cable Tie | x 2 |
| 1 | Top Panel | x 1 |
| 2 | Side Panel | x 1 |
| 3 | Shelf | x 1 |
| 4 | Side Panel | x 2 |
| 5 | Shelf | x 2 |
| 6 | Side Panel | x 1 |
| 7 | Side Panel | x 1 |
| 8 | Back Panel | x 1 |
| 9 | Back Panel | x 1 |
| 10 | Shelf | x 1 |
| 11 | Shelf | x 1 |
| 12 | Laminate | x 1 |
| 13 | Shelf | x 1 |
| 14 | Bracket | x 1 |
| 15 | Dowel | x 5 |
Assembly Steps
Step 1
Attach side panels (part 6) to the base/shelf (part 5) using screws (part C). The diagram shows two side panels (6) and one shelf (5) being joined.
Diagram Description: Two vertical panels (6) are positioned on either side of a horizontal shelf (5). Circular indicators show where screws (C) are inserted through the side panels into the shelf.
Step 2
Attach another side panel (part 6) to a shelf (part 7) using screws (part C). The diagram shows one side panel (6) and one shelf (7) being joined.
Diagram Description: A vertical panel (6) is shown connecting to a horizontal shelf (7). Screws (C) are indicated for attachment.
Step 3
Attach side panels (part 6, 7) to shelves (part 5) using screws (part C). The diagram shows two side panels (6, 7) and two shelves (5) being joined.
Diagram Description: Two vertical panels (6, 7) are shown with two horizontal shelves (5) positioned between them. Screws (C) are indicated for securing the shelves to the side panels.
Step 4
Attach shelf (part 1) to side panels (part 8, 10) using screws (part D) and brackets (part R). The diagram shows a shelf (1) being attached to two side panels (8, 10) with screws (D) and brackets (R).
Diagram Description: A horizontal shelf (1) is shown being connected to two vertical panels (8, 10). Screws (D) are used, and brackets (R) are also shown for support.
Step 5
Attach the top panel (part 1) to side panels (part 5, 6, 7) using screws (part C). The diagram shows the top panel (1) being secured to the side panels (5, 6, 7).
Diagram Description: The top horizontal panel (1) is shown being attached to the upper edges of the vertical side panels (5, 6, 7) using screws (C).
Step 6
Attach shelf (part 3) to side panels (part 8, 9, 10) using screws (part D) and brackets (part G). The diagram shows a shelf (3) being attached to side panels (8, 9, 10) with screws (D) and brackets (G).
Diagram Description: A horizontal shelf (3) is shown connecting to vertical panels (8, 9, 10). Screws (D) and brackets (G) are used for this connection.
Step 7
Attach shelf (part 5) to side panels (part 3, 5) using screws (part C). The diagram shows a shelf (5) being attached to side panels (3, 5) with screws (C).
Diagram Description: A horizontal shelf (5) is shown being secured between two vertical panels (3, 5) using screws (C).
Step 8
Attach back panel (part 8) to side panel (part 9) using screws (part C). Pay attention to the hole spacing; incorrect installation will make assembly impossible.
Diagram Description: A vertical back panel (8) is shown being attached to a side panel (9). Screws (C) are used. A warning symbol ⚠️ is shown next to the text about hole spacing.
Step 9
Attach side panel (part 8) to another panel (part 10) using screws (part C), noting the bevel.
Diagram Description: A vertical panel (8) is shown connecting to another vertical panel (10). Screws (C) are used. A close-up highlights a beveled edge.
Step 10
Attach side panel (part 9) to another panel (part 10) using screws (part C), noting the bevel.
Diagram Description: A vertical panel (9) is shown connecting to another vertical panel (10). Screws (C) are used. A close-up highlights a beveled edge.
Step 11
Attach panel (part 2) to shelf (part 15) using dowels (part 15) and screws (part M). Ensure the edge is aligned.
Diagram Description: A vertical panel (2) is shown being joined to a horizontal shelf (15). Dowels (15) are inserted into holes, and screws (M) are used for securing. A close-up shows an "Aligned edge" detail.
Step 12
Attach shelves (part 10, 11) to side panels (part 11) using screws (part E). The diagram shows shelves (10, 11) being attached to side panels (11).
Diagram Description: Two horizontal shelves (10, 11) are shown being attached to vertical side panels (11) using screws (E).
Step 13
Attach shelves (part 8, 9, 11) to side panels (part 10) using screws (part A) and brackets (part E). The diagram shows shelves (8, 9, 11) being attached to side panels (10) with screws (A) and brackets (E).
Diagram Description: Three horizontal shelves (8, 9, 11) are shown being connected to vertical side panels (10). Screws (A) and brackets (E) are used for this connection.
Step 14
Attach shelves (part 10, 11) to panel (part 2) using screws (part C). The diagram shows shelves (10, 11) being attached to panel (2).
Diagram Description: Two horizontal shelves (10, 11) are shown being attached to a vertical panel (2) using screws (C).
Step 15
Attach shelves (part 8, 9, 11) to side panels (part 10) using screws (part A) and parts (E). The diagram shows shelves (8, 9, 11) being attached to side panels (10) with screws (A) and parts (E).
Diagram Description: Three horizontal shelves (8, 9, 11) are shown being connected to vertical side panels (10). Screws (A) and parts (E) are used for this connection.
Step 16
Join the two main sections of the bookshelf using screws (part B). An assistant is required.
Diagram Description: The upper and lower sections of the bookshelf are brought together. Screws (B) are shown being used to connect them. Text indicates "An assistant is required."
Step 17
Attach side panels (part 6, 7) to the assembled unit using screws (part B). The diagram shows side panels (6, 7) being attached to the main body.
Diagram Description: Two vertical side panels (6, 7) are shown being attached to the assembled bookshelf structure using screws (B).
Step 18
Attach side panels (part 8, 9) to the unit using screws (part C). The diagram shows side panels (8, 9) being attached to the main body.
Diagram Description: Two vertical side panels (8, 9) are shown being attached to the assembled bookshelf structure using screws (C).
Step 19
Press the thread cover (part L) by hand onto the designated hole on shelf (part 6). The diagram shows a close-up of this action.
Diagram Description: A close-up view shows a thread cover (L) being pushed into a hole on a shelf (6). Text states, "The thread cover can be pressed in by hand."
Step 20
Install the light belt (part N). Follow the steps: pull the lamp band plug out through the wire cover, tape the lamp to the top of the ceiling position (bend to 90°), and start with the light belt from the backboard (part 7).
Diagram Description: A diagram illustrates the process of installing an LED light strip. It shows steps for pulling a plug, taping the light strip to the top, and connecting it to the backboard.
Step 21
Attach shelves (part 8, 9, 11) to the unit using parts (P). The diagram shows shelves (8, 9, 11) being attached with parts (P).
Diagram Description: Three horizontal shelves (8, 9, 11) are shown being secured within the bookshelf structure using parts labeled (P).
Step 22
Tilt the laminate (part 12) and attach it using parts (P). The diagram shows this action.
Diagram Description: A horizontal piece, identified as laminate (12), is shown being tilted and then attached using parts labeled (P).
Step 23
Attach bracket (part H) to shelf (part 13) using screws (part F). The diagram shows this connection.
Diagram Description: A bracket (H) is shown being screwed (F) onto a shelf (13).
Step 24
Attach the door panel. Use part J for the large hole and part I for the small hole. Also use parts K and O.
Diagram Description: The door panel is shown being assembled. It indicates using part J in a large hole and part I in a small hole. Parts K and O are also shown for attachment.
Step 25
Final assembly check. The diagram shows the completed bookshelf with shelves (2, 3, 13) and the door panel.
Diagram Description: The diagram displays the fully assembled corner bookshelf, showing the placement of shelves (2, 3, 13) and the attached door.
Step 26
Attach parts (Q, R, S, T). The diagram shows these parts being used in sequence.
Diagram Description: The diagram illustrates the use of parts Q, R, S, and T in a multi-step process, likely for final adjustments or securing components.
