Product Overview
The NÖDMAST is a portable LED lamp designed for indoor use. It is powered by batteries and can also be charged via USB.
[Image: A line drawing of a mushroom-shaped portable LED lamp with a cylindrical base.]
Safety Instructions
⚠️ For indoor use only.
IMPORTANT SAFETY INSTRUCTIONS
- Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
- Important information! Keep these instructions for future use.
CAUTION!
- The light source of this product is non-changeable light diodes (LED).
- Do not disassemble the product, as the light diodes can cause damage to the eyes.
WARNING
- Deviation from the assembly instructions may result in a risk of fire or electric shock.
FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
General Safety Precautions
- This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised.
- Children must be supervised to ensure that items are not used as toys.
CAUTION: To reduce the risk of electric shock and fire:
- Disconnect the decorative item from the power source before performing any maintenance or cleaning activity.
- Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
- Disconnect the item when leaving the house, going to bed, or if left unattended.
- Do not cover the decorative item with fabric, paper, or any material that is not part of the product when it is being used.
- Do not use the decorative item outdoors.
SAVE THESE INSTRUCTIONS
Assembly Instructions
[Diagram: Person with a screwdriver and a 'no' symbol ❌. This indicates that a specific tool or method should not be used for assembly.]
[Diagram: Person looking confused at lamp parts, then a person on the phone with an IKEA logo. This suggests consulting IKEA or instructions if unsure.]
- Step 1: Attach the central rod to the lamp base. This involves inserting a rod and securing it with two sets of screws and nuts. [Diagram shows inserting a rod and securing with screws and nuts, with "2x" indicating quantity.]
- Step 2: Attach the lampshade to the assembled stem. This involves aligning the lampshade and securing it with screws and nuts. [Diagram shows attaching the lampshade and securing it with screws and nuts.]
Usage and Maintenance
Battery Installation
[Diagram: Shows opening a battery compartment cover, inserting 4x AA batteries (NIMH 1.2V) with correct polarity (+/-). Includes warnings: "Do not incinerate" ❌? and "Dispose of used batteries according to local regulations" ♻️. Also shows a warning for incorrect battery insertion ❌.]
- This product requires 4x HR6/AA 1.2V rechargeable batteries.
- Rechargeable batteries are sold separately. IKEA recommends LADDA rechargeable batteries (2450 mAh, 1.2V).
- Do not incinerate batteries.
- Dispose of used batteries in accordance with local regulations.
Powering the Lamp
The lamp can be powered using a USB-C cable and a compatible USB charger, or a Class 2 listed power supply.
- USB-C cable and USB charger are sold separately.
- Use with a Class 2 listed power supply from IKEA with an output of 5Vdc, minimum 1A.
- [Diagram: Shows options for powering: a 5V DC Min 1A SELV power adapter, or a 5V DC Min 1A USB charger connected to a power source like a wall adapter or laptop.]
- [Diagram: Shows connecting a USB-C cable to the lamp's port.]
LED Indicator Status
The LED indicator shows the charging status:
- White LED pulsing: Charging in progress.
- White LED steady on: Charging complete.
- White LED flashing: Error. This can occur if batteries are inserted incorrectly, or if non-rechargeable or damaged batteries are inserted by mistake.
Adjusting the Lampshade
[Diagram: Shows a finger adjusting the angle of the lampshade by tilting and rotating it.]
The lampshade can be tilted and rotated to direct the light.
Importer Information (Mexico)
Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México.
Teléfono: 55-8310-8310.
Read and follow all safety and operation instructions before using this product. For indoor use only. Consult electrical specifications on the product label.
