MiBoxer TRI-K1 Rotating Triac Dimmer (2.4GHz)
Model No.: TRI-K1
Features
- Uses 2.4G wireless transmission technology
- 2.4G RF wireless remote control
- Smartphone app control (2.4GHz gateway is needed)
- Trailing edge phase-cut technology
- 0~100% stepless dimming and flicker free
- Lowest brightness setting function
- Built-in temperature detecting switch, over heart /loading protection
- Auto transmitting function, unlimited control distance
- Anti-fire PC shell is more safety
- Support Alexa, Google Assistant, Yandex Alice voice control (2.4GHz gateway is needed)
Parameters
| Name | Rotating Triac dimmer | IP Rating | IP20 |
| Model No. | TRI-K1 | Working Temperature | -10~40°C |
| Input Voltage | 100-240V~50/60Hz | EMC Standard (EMC) | ETSI EN 301 489-1 V2.2.3(2019-11) ETSI EN 301 489-3 V2.3.2 (2023-01) |
| Output | 100-240V~ | Safety Standard (LVD) | EN 61347-2-11:2001+A1:2019 EN 61347-1:2015+A1:2021 EN 62493: 2015+A1:2022 |
| Output Current | Max 1.36A | Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 (2018-07) |
| Output Power | 150W @110V; 300W @220V | Certification | CE, EMC, LVD, RED |
| Protocol | 2.4GHz RF | ||
| Control Distance | 30M |
Diagrams
Device Dimensions:
Front View: A circular device with a central power button/knob. Diameter: 86mm.
Side View: Shows the depth and connection terminals. Dimensions: 22mm (depth) x 9mm (terminal width) x 17mm (housing width).
Rear View: Shows the wiring terminals and product information. Dimensions: 48mm (width).
Connection Diagram
Two connection diagrams are provided, illustrating the wiring for AC input and AC output to connect to dimmable LED lights, traditional filament lamps, or halogen lamps. Both diagrams show the input terminals labeled 'L' and 'N', and output terminals labeled 'L' and 'N'.
Installation Diagram
The installation involves fixing the controller base to the bottom case with screws, and then clicking the upper glass panel onto the controller base, ensuring it clicks securely into place.
Remote Link
The Triac dimmer can be linked with a remote control. The process involves short pressing the 'SET' button once for remote linking. Alternatively, for 'Mini Set', long press the rotating button for 5 seconds, then rotate the button to dim, and short press to exit. A successful link is indicated by the light flashing 3 times slowly. If the light does not flash, the steps should be repeated. Note: Linking cannot be done again if the remote has already finished linking.
Functional Description
Knob Operation:
- Rotate the knob to adjust brightness.
- Short press the knob to turn the light on and off.
- Press and hold the knob for 5 seconds until the indicator flashes to set the minimum brightness. Turn the knob to adjust the brightness value and short press to exit.
"Breaker mode": This mode can be activated or shut down. When activated (short press "SET" 5 times quickly, indicator blinks 3 times quickly), it only supports turning the light on/off; dimming is not possible. To shut down the mode (short press "SET" 5 times quickly, indicator flashes 3 times slowly), the dimming function is restored.
Auto transmitting (2.4G RF remote signal): The controller can automatically transmit remote signals to other controllers within a 30m distance, effectively creating an unlimited control range. All controllers must be linked with the same remote for this feature to work.
Compatible with these 2.4G RF remote controls (Purchased separately)
The TRI-K1 dimmer is compatible with various MiBoxer 2.4G RF remote controls, including models such as C1, C3, S1, S2, S3, Y1, Y2, FUT094, FUT006, FUT007, FUT087/FUT087-B, B1/B1-B/T1, B2/T2, K1/K1-B, K2/K2-B, K3, and S1W+.
Attention
- Please turn off power supply before installation.
- Please ensure input voltage matches the device requirements.
- Do not disassemble the device if you are not an expert, as it may cause damage.
- Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may seriously affect the remote distance.
