Neomounts FPMA-D890BLACK Monitor Desk Stand - Instruction Manual

Product Overview

This document provides instructions for the Neomounts FPMA-D890BLACK monitor desk stand. This stand allows for the secure mounting of a monitor to a desk surface, offering adjustable height and viewing angles.

Model: FPMA-D890BLACK

Brand: Neomounts by Newstar

Adjustable Height: 360mm - 540mm

Base Dimensions: 320mm

VESA Compatibility: 75x75 mm and 100x100 mm

Weight Capacity: 0-6 kg (0-13.2 lbs)

Screen Size Compatibility: 36-54 cm (approx. 14-21 inches)

Parts List

The following parts are included in the package:

Note: Some hardware may be labelled with specific codes (e.g., M-A, M-B) for different monitor VESA hole patterns.

Installation Instructions

Step 1: Assemble the Desk Mount

Assemble the desk mount by connecting the pole (A) to the base (B) using the pole screw (G). The clamp base (C) attaches to the pole.

Diagram Description: Shows parts A, B, C, G being assembled.

Step 2: Attach the VESA Plate to the Monitor

Attach the VESA plate (D) to the back of your monitor using the appropriate screws (M-A, M-B, M-C, M-D, M-E, M-F) and washers provided. Ensure the VESA plate is oriented correctly for your monitor's VESA mounting holes (75x75mm or 100x100mm).

Diagram Description: Shows VESA plate (D) being attached to a monitor using various screws (M-A, M-B, M-C, M-D, M-E, M-F). Indicates VESA hole patterns and screw types.

Step 3: Install the Monitor

Mount the monitor, with the VESA plate attached, onto the monitor mount arm (F). Secure it in place.

Diagram Description: Shows the monitor with VESA plate being attached to the main arm (F).

Step 4: Route the Cables

Route the monitor and power cables along the stand. Use the cable management clips (H) to keep cables tidy and out of the way.

Diagram Description: Illustrates routing cables along the pole and securing them with clips (H).

Step 5: Adjusting Angle

Adjust the monitor's angle for optimal viewing. The stand allows for tilt adjustment (approximately +60° to -20°) and swivel (360° rotation). The height can also be adjusted between 360mm and 540mm.

Diagram Description: Shows the monitor mounted on the stand with indicators for tilt and swivel adjustments, including angle ranges.

Safety Precautions (CAUTION)

Please read and follow all instructions carefully before installation and operation to ensure safety. Store this manual for future reference.

• The manufacturer is not responsible for damage or injury due to incorrect installation or operation.
• Installation by qualified personnel is recommended. At least two people are needed for installation/removal to prevent falling objects.
• Inspect the installation area: avoid high temperatures, humidity, water contact, excessive dust/fumes, vibrations, or direct bright light. Install only on vertical surfaces.
• Ensure the mounting surface (wall, ceiling, floor) is strong enough to support at least four times the combined weight of the display and mount.
• Do not modify parts or use broken components. Contact your dealer for assistance.
• Tighten all screws securely but avoid excessive force to prevent damage.
• Holes and bolts may remain after removal; stains may appear after prolonged use.
• The product warranty covers the mount itself and is valid for 5 years.
• Consult the English manual for any disputes.