Neomounts FPMA-W910 Monitor Wall Mount Instruction Manual
Safety Precautions
Caution: Please read all instructions carefully before proceeding with installation. Improper installation can lead to product damage or personal injury.
- Ensure the mounting surface can support the weight of the mount and the monitor.
- Use appropriate hardware for your wall type (e.g., lag bolts for wood studs, expansion bolts for concrete).
- Do not overtighten screws.
- Keep small parts away from children.
Product Specifications
[weight-icon] Max Load: 12 kg (26.5 lbs) [reach-icon] Arm Reach: 21 cm [vesa-icon] VESA Compatibility: 75x75 mm and 100x100 mm [screen-size-icon] Screen Size: 10 to 26 inches
Parts Included
The following parts are included in the package:
- Small screws (x9)
- Nut (x1)
- Connector plate (x1)
- Wall mount plate (x1)
- Wrench (x1)
- Allen key 5mm (x1)
[Diagram Description: Visual representation of all included parts: nine small screws, one nut, one connector plate, one wall mount plate, one wrench, and one 5mm Allen key.]
Required Tools (Not Included)
- [tool-icon] Pencil
- [drill-icon] Drill
- [tape-measure-icon] Tape measure
Installation Steps
Step 1: Mounting the Wall Mount Plate
Attach the wall mount plate securely to the wall. Ensure it is level and firmly fixed using appropriate wall anchors or screws (not included, select based on wall type).
[Diagram Description: Illustration depicting the wall mount plate being affixed to a vertical surface (wall). Screws are shown passing through the plate into the wall. This step requires tools like a drill and tape measure for accurate placement. It also notes the need for appropriate wall anchors or bolts depending on the wall material.]
Step 2: Installing the Monitor onto the VESA Plate
Attach the VESA mounting plate to the back of your monitor. Align the plate with the VESA mounting holes (75x75mm or 100x100mm) on the monitor and secure it with the provided small screws.
[Diagram Description: Visual showing the VESA mounting plate being attached to the rear of a monitor. The plate is aligned with the monitor's VESA mounting holes, which are specified as either 75x75mm or 100x100mm. Small screws secure the plate to the monitor.]
Step 3: Securing the Bracket to the Wall Mount Plate
Connect the monitor arm assembly (with the monitor attached) to the wall mount plate. Secure the connection as indicated in the diagram.
[Diagram Description: Illustration showing the monitor arm assembly being connected and secured to the previously mounted wall plate.]
Step 4: Adjusting the Torque
Adjust the torque (tension) on the monitor arm's joints using the provided Allen key. This allows for smooth movement and ensures the monitor stays in the desired position without drifting.
[Diagram Description: A close-up view showing the use of the Allen key to adjust a pivot point on the monitor arm. This adjustment controls the tension or 'torque' of the arm's movement, allowing the user to set how easily the monitor can be moved and how well it holds its position.]
Notes
For additional support or product information, please visit the manufacturer's website.
