Neomounts SELECT DS70S-950BL1

Parts List

Product: Neomounts SELECT DS70S-950BL1 Monitor Desk Mount

Specifications:

• VESA Compatibility: 75x75 mm, 100x100 mm
• Weight Capacity: 1-18 kg
• Screen Size Compatibility: 20-52 cm (8.8-20.5 inches), 8.8-62.5 cm (3.5-24.6 inches)
• Desk Thickness Compatibility: 10-50 mm (Clamp), 10-55 mm (Grommet)

Included Components:

• A. Desk Clamp (x1)
• B. Grommet Base (x1)
• C. Pole (x1)
• D. Arm Segment (x1)
• E. Arm Segment (x1)
• F. Decorative Covers (x4)
• G. VESA Plate (x1)
• H. M8x150 Screw (x1)
• I. Connecting Piece (x1)
• J. Cable Management Cover (x1)
• M-A. M4x12 Screws (x4)
• M-B. M5x12 Screws (x4)
• M-C. D5 Washers (x4)
• Tool (?)
• Drill (?️)

Diagram shows an exploded view of all parts, including the desk clamp, grommet base, pole, arm segments, VESA plate, various screws, washers, and tools. VESA patterns (75x75mm, 100x100mm), weight capacity (1-18kg), and screen size ranges are also indicated.

Step 1: Desk Mounting Options

A. Clamp Installation

Instructions: Install the clamp to the desk. This method is suitable for desktop thickness between 10-50 mm.

Diagram shows the desk clamp (A) being attached to the edge of a desk. It illustrates the clamping mechanism and indicates the compatible desk thickness range of 10-50 mm.

B. Grommet Installation

Instructions: Install the grommet through the desk. This method is suitable for desktop thickness between 10-55 mm. A desk hole of Ø10mm is required.

Diagram illustrates installing the grommet base (B) through a pre-drilled hole in the desk. It shows the grommet passing through, with a securing plate and screw (J) underneath. The compatible desk thickness range is 10-55 mm, and the required hole diameter is Ø10mm.

Step 2: Attach Arm to Base

Instructions: Choose the desired rotation mode (full range or 180° lock) and attach the arm to the base.

Diagram shows how to connect the monitor arm segments (D, I) to the central pole (C) or base. It illustrates options for full rotation or a 180° locked position.

Step 3: Assemble Arm Segments

Instructions: Attach the upper arm segment to the lower arm segment.

Diagram shows the connection of the upper arm (A) to the lower arm segment (D or I), likely using a connecting piece or bolt.

Step 4: Attach VESA Plate to Screen

Instructions: Attach the VESA plate (G) to the back of the monitor screen using the provided screws (M-A, M-B) and washers (M-C). Ensure you select screws of the correct length.

Diagram shows the VESA plate (G) being mounted onto the back of a monitor. It highlights the use of screws (M-A, M-B) and washers (M-C) and includes visual cues for selecting the appropriate screw length: a checkmark (✔️) for correct, and icons for "Too long" (❌) and "Too Short" (❌).

Step 5: Install Decorative Covers

Instructions: Place the decorative covers (F) to conceal mounting hardware and provide a clean finish.

Diagram illustrates the placement of the decorative covers (F) onto the arm joints or mounting points for a finished look.

Step 6: Install Monitor

Instructions: Install the monitor onto the assembled arm mount.

Diagram shows the monitor, now with the VESA plate attached, being mounted onto the arm assembly.

Step 7: Adjust Gas Spring

Instructions: Adjust the gas spring mechanism to counterbalance the weight of the monitor, ensuring smooth movement and stability.

Diagram shows the gas spring adjustment point on the arm. It uses '+' and '-' symbols to indicate how to tighten or loosen the mechanism to balance the monitor's weight.

Step 8: Cable Management

Instructions: Remove the cable cover, run the cable(s) through the cover, and reattach the cover for neat cable management.

Diagram illustrates removing a cable cover, routing monitor cables through the designated channel, and then re-securing the cover.

Step 9: Final Adjustment

Instructions: Adjust the mount to the desired position for optimal viewing. If the display does not stay at the desired position, tighten the screw as shown.

Diagram shows the final positioning of the monitor arm. A note indicates that if the display drifts, a specific screw should be tightened to secure the position.

Safety Precautions