Heyday™ TWS Earbuds With Screen Case

Getting Started

Welcome to your Heyday™ true wireless earbuds. Let's get you set up.

Charging:

• Full charge of the earbuds requires approximately 1 hour.
• Earbuds playback time up to 3.5 hours. Up to 12 hours with charging case.
• Place the earbuds in the charging case to start charging them. Suggest to fully charge for first use.
• Charging case full charge requires approximately 2 hours. Plug the USB-C charging cable to charge.
• Plug USB-C end of charging cable into a DC 5V≥0.25A power supply.
• When the charging case powers off due to low battery, connect it to a USB charger and long-press the power button to turn it on before charging the earbuds.

How to Wear:

The left earbud has an "L" and the right earbud has an "R" marked on it. Place the left/right earbud in the left/right ear and make sure the speakers are pointed upwards when placing them in your ears.

Eartips Fitting:

M-size eartips are pre-installed on the earbuds. Replacement of eartips (S, M, L) with different sizes to fit your ears.

• Attach the new eartips by pushing them firmly onto the earphones.
• Remove the eartips from the earphones gently.

Pairing

Lift the lid of the charging case or long press the earbuds Multi-functional touch control for three seconds to power on.

Use Bluetooth® settings on your phone to pair with the Heyday Earbud 13. A prompt tone will sound upon successful pairing.

With the lid open, press and hold the button on the back of the case for 3 seconds to pair the earbuds (left & right). If currently connected to a phone, this will disconnect the Bluetooth connection. Close and re-open the lid to reconnect to the phone.

Put back the earbuds and close the charging case lid or long press the earbuds Multi-functional touch control for five seconds to power off.

Controls and Functions

Power Button:

• Press once: Wake screen
• Press again: Sleep screen
• Long press: Power off (Tap to confirm, X to cancel)
• Long press: Power on charging case

Earbuds Press/Hold Instructions:

Screen Display/Function Icons:

• Volume: Displays current volume level (0-16).
• Brightness: Controls screen brightness (Low/Medium/High).
• EQ Toggle: Selectable when enabled. EQ presets: JAZZ, VOCAL, BASS, CLUB, NORMAL.
• Spatial Audio Toggle: Selectable when enabled. Options: Cinema audio, Music audio, Gaming audio.
• ANC Mode: Options: NORMAL Mode (Default), Ambient Sound, ANC.
• Time Display: Automatically synchronizes the time of connected devices.
• Battery Indicators: Shows battery level for earbuds and charging case (Yellow when charging).
• Status Bar Icons: Indicate connection status (Earbuds not connected to case, Earbuds connected to case, Earbuds, case, and phone connected).

Troubleshooting and Tips

• If the earbuds are not working correctly, turn them on/off.
• If the earbuds won't turn on, recharge the battery and try again.
• If the earbuds won't charge, ensure the power supply works (DC 5V≥0.25A) and is not damaged.
• If the earbuds make no sound, adjust the volume.
• If the earbuds make no sound or do not show as an available device, ensure they are not paired to another device. If so, unpair the device and re-pair to the desired device.
• This device does not have a pairing code. If prompted for one, ensure you are connecting to the correct device. If not, "forget" the device and re-pair.
• The earbuds will power off if not used for more than 5 minutes.
• If the Bluetooth® connection range exceeds 10 meters, the earbuds/charging case will disconnect with a prompt sound from earbuds or an indicator in the status bar. If the connection is not re-established within 5 minutes, the earbuds will turn off automatically.

Safety Information

• Do not use near any water source.
• Do not modify or repair this device.
• Do not use in high temperatures or extreme weather.
• Do not use chemical detergents to clean your device; use a soft dry cloth.

Technical Specifications

• Earbuds FCC ID: 2BAXW-TTY95
• Charging Case FCC ID: 2BAXW-TTY95S
• Model: TTY95
• Input: 5V Max 0.25A
• Made in China

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Contact Information

Need some help? Can't get it to pair? Have a question or comment?

Call Target at 1-833-TGT-Tech.