Heyday True Wireless Earbuds

Earbuds Overview

Left Earbud:

• Microphone
• Touch Sensor
• Earbud Power Indicator

Right Earbud:

• Microphone
• Touch Sensor
• Earbud Power Indicator

Charging Case:

• Case Power Indicator
• Input USB-C Port
• Reset Button

What's Included

• TWS Earbuds
• TWS Earbud Case
• USB-C Charging Cable
• Small, Medium, and Large Earbud Tips

Indicators

Earbud Indicators:

• Rapid Flashing Red/White: Pairing mode
• Flashes White and Fades: Paired
• Flashing Red: Low power
• Solid Red: Charging
• No Light: Charging complete

Case Indicators:

• One Light: 25% charged
• Two Lights: 50% charged
• Three Lights: 75% charged
• Four Lights: 100% charged

Audio Tones:

• Ascending Tones: Power on
• Descending Tones: Power off
• Three Rapid Tones: Ready to pair
• Single Chime: Paired
• Two Rapid Dings: Low battery
• Quick Beep: Next (Right) / Previous (Left) song

Pairing Your Earbuds

1. To pair the earbuds to your device for the first time, open the case and remove both earbuds.
2. The buds will start to flash red and white, indicating they are ready to pair.
3. Use the Bluetooth settings on your device to pair with "HEYDAY EARBUD 05". When the earbuds have successfully paired, they will turn white for five seconds and then fade.
4. To re-enter pairing mode, place both earbuds back into the charging case with the lid open. Hold the reset button on the back for 3 seconds until the case power indicator flashes 3 times. To reset to factory settings, hold the reset button for 6 seconds until the indicator flashes 6 times. After re-entering pairing or resetting, start the pairing process again from step 1.

Earbud Tips

1. The earbuds come with small, medium, and large earbud tips that can be changed at any time.
2. To change the size of the earbud tip, squeeze it and pull it away from the earbud.
3. Select the size that is most comfortable for you and push it onto the earbud. The earbud tip has an interior sleeve that slides onto the earbud. Repeat steps 2 and 3 for the second earbud.

Charging

Charging Earbuds:

• Place both earbuds back into the case.
• Charging is complete when the lights turn off.
• A full charge requires approximately 1 hour.

Charging Case:

• Plug the USB-C end of the charger into the back of the case.
• Plug the USB end into a power supply of at least DC 5V 1A (use a UL-compliant power supply).
• A full charge requires approximately 2 hours and provides 24 hours of earbud use.
• Charging is complete when all 4 LEDs are solid white.

IPX5 Water Resistance

The earbuds are resistant to sweat, making them suitable for workouts. Note: The charging case does not have the same rating and should not be used in the same conditions.

Single Earbud Use

After pairing to your device, remove only the right earbud from the case to enter single earbud use.

Troubleshooting

• If the earbuds are not working correctly, place them into the case with the lid open and reset them.
• If the earbuds won't turn on, recharge the battery and try again.
• If the earbuds won't charge, ensure the power supply works, is rated at 5V≥1A, and is not damaged. Also, check that the case is charged.
• If the earbuds still won't charge, ensure the charge pins are clear of debris, as this may cause a connection issue. Use a soft, dry cloth to clean them if necessary.
• If the earbuds make no sound or do not appear as an available device, check if they are already paired to another device. If so, unpair them and then re-pair to the desired device.

Need Some Help?

Can't get it to pair? Have a question or comment?

Call us at: 877-698-4883 or 877-MyTgtTech

Online at: TargetTechSupport.com

Safety

• Do not use near any water source.
• Do not modify or repair this device.
• Do not use chemical detergents to clean your device; use a soft, dry cloth.
• WARNING: The battery (or batteries or battery pack) shall not be exposed to excessive heat such as sunshine or fire.

Compliance Information

Heyday

FCC ID: 2A023-TW15C Model: TW15C Input: 5V Max 1A Earbud Battery Capacity: 3.6V/60mAh/0.216Wh Case Battery Capacity: 3.7V/500mAh/1.850Wh Made in China

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Target Corp. Mpls. MN, 55403 Phone: 1-612-304-6073