Heyday KS0+MQZ Wireless Keyboard Instructions Manual
Size: 8 in x 5.6 in = 203.2 x 142.24mm
Wireless Keyboard Overview
Top View
Shows the layout of the keys, including the wireless USB receiver slot, ON/OFF switch, and LED indicators.
Bottom View
Features the battery compartment, battery cover, and the wireless USB receiver.
Detailed Setup
This keyboard supports connection to up to 3 different devices using the '$1' and '$2' keys to switch between the wireless USB receiver and two Bluetooth channels.
Connecting via Wireless USB Receiver
This connection is plug-and-play. Ensure the keyboard is powered on and the channel is set to the USB receiver channel. Plug the USB receiver into an available USB A port on your device.
Connecting via Bluetooth
1. Turn on the keyboard and select either Bluetooth channel '$1' or '$2'.
2. On your device (PC or iOS):
- PC: Go to Settings > Bluetooth & other devices > Add Bluetooth or other device > Add a device (Bluetooth).
- iOS: Go to Apple menu > System Preferences > Bluetooth. Turn Bluetooth on.
3. Press and HOLD the '$1' or '$2' key on the keyboard to enter discoverable mode. The LED indicator will flash rapidly.
4. Select "heyday keyboard" on your device to connect. The LED will stop flashing and remain lit for 3 seconds upon successful pairing.
Troubleshooting
If the keyboard is not working or pairing:
- Turn the keyboard off and on again. Re-plug the USB receiver if applicable. Ensure the correct channel is selected.
- Press and HOLD the designated pairing key ('$1' or '$2') while keeping the keyboard close to the receiver/device.
- Ensure Bluetooth is enabled on your device.
- If previously paired, ensure the device is discoverable and the keyboard is set to the correct Bluetooth channel used for that device.
- Try repeating the pairing process.
Function Keys
The function keys (F1-F12) can be used in two modes: standard mode or by pressing the 'Fn' key in combination with the function key.
| Key Combination | Function | Key Combination | Function |
|---|---|---|---|
| F1 | Decrease display brightness | Fn + F1 | Switch to previous media track |
| F2 | Increase display brightness | Fn + F2 | Play media or pause current media track |
| F3 | Open Windows Search | Fn + F3 | Switch to next media track |
| F4 | Mutes the computer's sound | Fn + F4 | [Mute sound] |
| F5 | Decrease computer volume | Fn + F5 | [Volume down] |
| F6 | Increase computer volume | Fn + F6 | [Volume up] |
| F7 | [Not specified] | Fn + F7 | [Not specified] |
| F8 | [Not specified] | Fn + F8 | [Not specified] |
| F9 | [Not specified] | Fn + F9 | [Not specified] |
| F10 | Switch to Bluetooth channel 1 / device 1 | Fn + F10 | [Not specified] |
| F11 | Switch to Bluetooth channel 2 / device 2 | Fn + F11 | [Not specified] |
| F12 | Switch to wireless USB receiver channel / device | Fn + F12 | [Not specified] |
Low Battery Indicator
When the LED indicator starts blinking, it signifies that the batteries need to be replaced.
Included Items
- Wireless Keyboard (connect via wireless USB receiver or Bluetooth)
- USB receiver
- 2 x AAA batteries
Support and Safety Information
Need Help?
For assistance or questions, contact TargetTechSupport.com or call 877-698-4883.
Safety Precautions:
- Do not use near water sources.
- Do not modify or attempt to repair the device.
- Avoid use in high temperatures or extreme weather conditions.
- Clean the device with a soft, dry cloth; do not use chemical detergents.
- Do not mix old and new batteries, or different types of batteries (alkaline, zinc-carbon, rechargeable).
Regulatory Information
FCC ID: PRDKB50 Model: KS0 MC:XXXXX Input: XXXV XXX MA Made in China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radiation Exposure Statement: The product complies with FCC portable RF exposure limits for an uncontrolled environment and is safe for intended operation. RF exposure reduction can be achieved by keeping the product as far as possible from the user's body or by setting the device to a lower output power if available.
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
