Tow-Trust Towbars
Important: Please read General Notes overleaf before fitting
Issue 4
TK12 KIA SPORTAGE 3 2010> HYUNDAI ix 35 2010>
Parts List
| Item | Qty | Description | Item | Qty | Description |
|---|---|---|---|---|---|
| A | 1 | Crossmember | D | 2 | M16 x 50 Bolts, Nuts & S/P Washers |
| B | 1 | Extension Bar | E | 8 | M10 x 35 x 1.25 Bolts & S/P Washers |
| C | 2 | Side Arms | F | 6 | M12 x 40 Bolts, 4 Nuts & 8 S/P Washers |
| G | 4 | M12 x 40 Bolts & Nyloc Nuts | |||
| H | 8 | 10 x 40 Flat Washers | |||
| J | 4 | 12 x 25 Flat Washers |
Fitting Instructions
- Optional: You may find fitting this Towbar easier by first lowering the exhaust silencers.
- Locate all Towbar mounting points and clear of any mastic.
- Using item E with item H loosely fix side arms (item C) to each chassis member.
- Carefully insert item A up into the rear bumper and fix in place with item F.
- Using item G with item J fix item B to item A.
- Using item D fix your required ball bracket and wiring plate (not supplied in this kit) to item B.
- Fully tighten all nuts and bolts ensuring Towbar is rigid and secure.
Diagram Description
The diagram illustrates the Tow-Trust TK12 towbar assembly. It shows the main crossmember (A) positioned against a vehicle chassis, with extension bars (B) and side arms (C) also depicted. Various fasteners, including bolts (D, E, F, G) and washers (H, J), are shown as connection hardware. The diagram visually represents the attachment points and the general layout of the towbar components on the vehicle frame.
Notes
1. Torque Settings see notes overleaf. 2. Nose load limits and vehicle manufacturers trailer / caravan weight limits must be observed.
