STRANDAD
IKEA Design and Quality
Important Safety Information
For indoor use only.
Warning: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.
Assembly Instructions
Product Identifier: AA-2492770-3
Step 1: Assemble the Base Structure
Attach three flexible metal rods (legs) to the central socket housing. Ensure they click into place.
(Diagram shows 3x connections)
Step 2: Attach the Support Ring
Connect the circular metal support ring to the lower ends of the three base legs.
Secure the ring to each leg using three small connectors.
(Diagram shows 3x connections)
Step 3: Install the Upper Frame
Insert the wire frame structure (upper support) into the top of the central socket housing.
Secure the frame using two clips.
(Diagram shows 2x connections)
Step 4: Position the Lamp Shade
Carefully place the cylindrical fabric lamp shade over the assembled base and upper frame.
Align the shade's inner structure with the upper frame supports.
(Diagram shows 2x alignment points)
Step 5: Secure the Lamp Shade
Press down on two points on the upper rim of the lamp shade to secure it to the frame.
(Diagram shows 2x securing points)
Step 6: Final Shade Attachment
Ensure the lamp shade is properly attached and sits securely on the frame.
Step 7: Install Light Bulb
Screw a light bulb into the socket located in the center of the lamp.
(Diagram shows a hand screwing in a bulb)
