STRANDAD Floor Lamp Assembly Instructions
Important Safety Information
This STRANDAD floor lamp is designed for indoor use only.
Hazard Warning: If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their authorized service agent, or a similarly qualified person to prevent potential hazards. If you are uncertain about the procedure or who to contact, please reach out to IKEA customer support.
[The original document provides detailed safety and usage warnings in numerous languages, including German, French, Dutch, Danish, Icelandic, Norwegian, Finnish, Swedish, Czech, Spanish, Italian, Hungarian, Polish, Estonian, Latvian, Lithuanian, Portuguese, Romanian, Bulgarian, Croatian, Greek, Ukrainian, Serbian, Slovenian, Turkish, Chinese (Simplified and Traditional), Korean, Japanese, Indonesian, Malay, Arabic, and Thai.]
Assembly Guide
Follow these step-by-step instructions to assemble your STRANDAD floor lamp.
Step 1: Assemble the Base
Begin by connecting the three vertical support poles to the circular metal base. Each pole is inserted into a designated slot on the base and secured, likely through a push-fit mechanism.
[Visual description: Three upright rods are attached to a round base. Close-up views show the connection points.]
Step 2: Attach Lower Pole Section
Screw the threaded end of the lower pole section into the corresponding fitting located on the assembled base structure. Ensure it is tightened securely.
[Visual description: A pole section is screwed into the base. Arrows indicate insertion and rotation for tightening.]
Step 3: Route the Power Cord
Carefully thread the power cord down through the hollow center of the assembled pole structure, from the top towards the base.
[Visual description: The power cord is shown being fed downwards through the lamp's central pole.]
Step 4: Secure Lamp Head Assembly
Attach the lamp head unit, which houses the light bulb socket and electrical components, to the top of the pole. Push it down until it clicks into place, indicating it is securely fastened.
[Visual description: The lamp head assembly is attached to the top of the pole. Close-ups highlight a clipping mechanism and the word "Click!".]
Step 5: Connect Upper Pole Sections
Join the remaining upper pole sections together. Insert one section into another and secure them, typically by screwing them together.
[Visual description: Two pole segments are shown being connected end-to-end.]
Step 6: Install Light Bulb
Insert a suitable light bulb into the socket within the lamp head. Screw the bulb in gently until it is snug.
[Visual description: A light bulb is shown being screwed into the lamp socket.]
Step 7: Attach Top Finial
Screw the decorative cap, or finial, onto the very top of the assembled lamp pole.
[Visual description: A cap is being screwed onto the threaded top of the lamp pole.]
Step 8: Mount Lampshade
Place the cylindrical lampshade over the internal frame of the lamp. Secure the lampshade by tightening the knob or screw located at the top of the pole.
[Visual description: The lampshade is positioned over the lamp structure. A knob at the top is being turned to secure it.]
Step 9: Final Adjustments
Ensure the lampshade is correctly aligned and sits straight. Make any necessary final adjustments for a neat appearance.
[Visual description: Hands are shown making final adjustments to the position of the lampshade.]
