LampsModern Installation Instructions
Vintage Bubble Glass Flush Mount Ceiling Light
Model: CL0153
Step 1: Mount the Hanging Plate and Connect Wires
Action: Self-tapping screw passes through the hanging plate hole then tighten it clockwise to lock the hanging plate.
Diagram Description: An illustration shows a ceiling with electrical wires (brown, blue, yellow) emerging from a junction box. A hanging plate is being attached to the ceiling. Labels indicate:
- Brown wire connects to "L" terminal.
- Blue wire connects to "N" terminal.
- Yellow wires connect to "E" terminal.
- Connect the wires to the terminals.
- The ceiling plate with fixed screws.
- Insulation tape is shown.
Step 2: Install Lampshades
Action: Install lampshades from top to bottom.
Diagram Description: An illustration shows a lampshade being attached to the fixture. It indicates to "Rotate and fix the lampshade.".
Step 3: Turn on the Power
Action: Turn on the power.
Diagram Description: An illustration shows a hand flipping a light switch to the "ON" position.
Lamp Instructions and Precautions
| Maintenance | Precautions | Tip |
|---|---|---|
| 1. Voltage: 110-120V | Keep the lighting away from acidic chemical solvents to avoid damage. | Please follow the instructions then install the parts in the correct order. |
| 2. Please wear gloves [glove emoji] when install. | ||
| 3. Don't install it on the moist ceiling [no-water-symbol]. | ||
| 4. Turn off the power [power-off-symbol] before cleaning out. | ||
| 5. Please wash with the sanitizer without corrosivity. |
