LampsModern Branched Modern Iron LED Living Room Ceiling Light
Model: DJ1175Z
Installation Instructions
Follow these steps carefully to install your new ceiling light.
Step 1
Thread the central rod or mounting post through the designated hole.
Description: A person is shown threading a mounting rod through the central part of the light fixture base.
Step 2
From the end of the threaded rod, insert the washer and nut, then tighten it securely.
Description: A person is shown inserting a washer and nut onto the end of the threaded rod and tightening it.
Step 3
Screw on the decorative wooden fittings onto the appropriate parts of the fixture.
Description: A person is shown screwing a round wooden cap onto the end of a rod extending from the fixture.
Step 4
Mount the fixture to the ceiling. Please refer to the tightening sequence of the nut for secure attachment.
Description: The underside of the ceiling fixture is shown, with wires exposed, ready to be connected and mounted.
Step 5
Connect the wires. Twist wires of the same color together. Connect the white wires to the red and blue wires respectively.
Description: Hands are shown connecting electrical wires. Wires of the same color are twisted together, and white wires are being connected to red and blue wires.
Step 6
Attach the light source module. The light source on the top of the ceiling fixture is assembled and tightened.
Description: A hand is using a screwdriver to secure the LED light module to the base of the fixture.
Lamp Instructions & Safety Symbols
Please observe the following symbols and instructions:
[Indoor Use] ? Suitable for indoor environments only.
[Voltage: 110-120V] ⚡ Operates on 110-120V power supply.
[Not for wet locations] ?? Do not install in areas exposed to moisture or water.
[Double insulated] ⚡⚡ This fixture is double insulated.
[Grounding required] ⏚ Ensure proper grounding during installation.
[Class II appliance] ⚡⚡ This is a Class II appliance.
[Wear gloves] ? It is recommended to wear gloves during installation.
[Do not cut wires] ✂️? Do not cut electrical wires.
[Do not strike] ?? Avoid striking the fixture.
[Do not expose to water] ?? Keep the fixture away from water.
[Keep away from chemicals] ?? Avoid contact with chemical solvents.
[Turn off power] ?? Always turn off the main power supply before cleaning or maintenance.
Maintenance & Precautions
| Maintenance | Precautions |
|---|---|
| 1. Voltage: 110-120V | Keep the lighting away from acidic chemical solvents to avoid damage. |
| 2. Please wear gloves when installing. | |
| 3. Do not install it on a moist ceiling. | |
| 4. Turn off the power before cleaning out. | |
| 5. Please wash with a sanitizer without corrosivity. |
Tip
Please follow the instructions and install the parts in the correct order.
