LampsModern Installation Instructions

Step 1: Mount Hanging Plate

Two screws with anchors are shown being inserted into a ceiling. A metal hanging plate is secured to the ceiling with these screws. Text indicates: "Self-tapping screw passes through the hanging plate hole then tighten it clockwise to lock the hanging plate." The ceiling plate is secured with fixed screws.

Step 2: Wiring

Wires are shown extending from the ceiling fixture. A junction box is depicted. The white wire connects to terminal "N" (Neutral), the black wire connects to terminal "L" (Live), and the yellow wire connects to terminal "E" (Earth/Ground). Text indicates: "Connect these two wires to the wires on the bulb directly." (referring to the lamp's internal wiring).

Step 3: Attach Lamp Body

The main lamp body is shown being attached to the ceiling plate. An arrow indicates connection to "part2".

Step 4: Install Bulb and Shades

1. Bulb and First Gasket: A gasket is placed on an LED bulb and then tightened. Text: "1. Put the gasket on the LED bulb then tighten it."

2. Second Layer Shade: The LED bulb assembly is passed through the second layer shade, with a second gasket being tightened. Text: "2. LED bulb crosses through the hole of the second layer shade, put the second gasket then tighten it."

3. First Large Shade: The LED bulb assembly is passed through the first large shade, with a third gasket being tightened. Text: "3. LED bulb crosses through the hole of the first large shade then with the third gasket tightened."

4. Completion: The completed installation is shown. Text: "4. Installation completed Turn on the power."