Installation Instructions
Vintage Bubble Glass Flush Mount Ceiling Light
Model: CL0153
Step 1: Mounting and Wiring
Secure the hanging plate to the ceiling using self-tapping screws. Tighten them clockwise to lock the plate in place.
Connect the wires to the terminals:
- Brown wire connects to "L" (Live).
- Blue wire connects to "N" (Neutral).
- Yellow wires connect to "E" (Earth/Ground).
Diagram Description: A diagram illustrates the installation of the ceiling fixture. A hanging plate is attached to the ceiling using self-tapping screws, tightened clockwise. Wires from the ceiling (brown for Live 'L', blue for Neutral 'N', and yellow for Earth 'E') are connected to the corresponding terminals within the fixture. The ceiling plate is shown secured with screws.
Step 2: Attaching the Lampshade
Install the lampshade from top to bottom. Rotate and fix the lampshade securely.
Diagram Description: Illustration showing the glass lampshade being attached to the main fixture. The diagram indicates that the lampshade should be rotated and fixed securely from top to bottom.
Step 3: Power On
Turn on the power supply to test the light.
Diagram Description: Diagram depicting a hand operating a wall-mounted light switch, moving it to the 'ON' position to activate the fixture.
Lamp Instructions and Care
| Maintenance | Precautions | Tip |
|---|---|---|
| ⚙️ Voltage: 220-240V | ☣️ Keep lighting away from acidic chemical solvents to avoid damage. | ? Please follow the instructions. |
| ? Wear gloves when installing. | ⚠️ Avoid damage. | ➡️ Install the parts in the correct order. |
| ? Do not install on a moist ceiling. | ||
| ? Turn off the power before cleaning. | ||
| ? Use sanitizer without corrosivity for cleaning. |
