Resistex Argos déco Installation Guide

Installation Instructions

Safety Notes

⚠️ Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

⚠️ Risk of electrostatic discharges. (ESD Norm). Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

Do not use chemicals or abrasives products to clean the fixture.

Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Mounting / Installation

Ceiling Kit Installation (KIT PLAFONNIER)

1. Step 1: Ensure power is OFF. Prepare mounting hardware: two Ø6 mm screws and two anchors (X2).
2. Step 2: Attach the mounting bracket to the ceiling.
3. Step 3: Connect electrical wiring (Line, Neutral, Earth) to the terminal block.
4. Step 4: Attach the luminaire body to the mounting bracket.
5. Step 5: Secure the luminaire with screws.
6. Step 6: Verify electrical connections within the terminal block.
7. Step 7: Confirm correct wiring (Neutral, Earth, Line).
8. Step 8: Finalize installation and turn power ON.

Suspension Kit Installation (KIT SUSPENSION)

1. Step 1: Ensure power is OFF. Prepare mounting hardware: two Ø6 mm screws and two anchors (X2).
2. Step 2: Attach suspension cables/rods to the ceiling.
3. Step 3: Connect electrical wiring (Line, Neutral, Earth) to the terminal block.
4. Step 4: Attach the luminaire body to the suspension cables/rods.
5. Step 5: Secure the luminaire with screws.
6. Step 6: Verify electrical connections within the terminal block.
7. Step 7: Confirm correct wiring (Neutral, Earth, Line).
8. Step 8: Finalize installation and turn power ON.

Product Standards and Certifications

Certifications: ROHS, CLASSE, IP65 (Ingress Protection), IK08 (Impact Protection), >80 CRI (Color Rendering Index), CE (Conformité Européenne), SANS CEX.

Company Information

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: 04 93 276 276 - Fax: 04 93 276 280

Email: contact@resistex-sa.com

Website: www.resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477