Pulsa Line Installation Guide

Product Overview

This document provides installation instructions for the Resistex Pulsa Line lighting fixture. It covers safety precautions, maintenance, and step-by-step guidance for ceiling and suspension mounting.

Safety Notes

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Installation Steps

Step 1: Power Off

Ensure the power supply is switched OFF before starting installation. [Power Off Indicator]

Step 2: Wattage Selection

Use the integrated switch to select the desired wattage: 100W, 150W, or 200W. [Wattage Selector Switch]

Step 3: Mounting Preparation & Options

Prepare the mounting hardware, including brackets and screws. [Mounting Brackets and Screws]

Choose the mounting method: Ceiling Mount (Plafonnier) or Wall Mount (Mural). [Ceiling Mount Option], [Wall Mount Option]

Step 4: Fixture Attachment

Attach the fixture to the prepared mounting plate. Observe mounting direction indicators and potential 180° rotation. [Fixture Attachment], [Mounting Direction Indicator]

Step 5: Suspension Kit Installation (if applicable)

For suspension mounting, use the provided suspension cable. Ensure the cable supports a maximum load of 10kg and is installed at a minimum distance of 500mm from the mounting point. [Suspension Cable], [Max Load 10kg], [Minimum Suspension Distance ≥500mm]

Connect the fixture to the suspension system. [Suspension Fixture Attachment]

Step 6: Wiring

Connect the electrical wires: Neutral (N), Earth (E), and Live (L). Ensure all connections are secure. [Wiring Terminals N E L]

Step 7: Final Securing and Clearance

Secure the fixture in its final position. Ensure a clearance of at least 150mm from surrounding elements. [Final Fixture Securing], [Clearance Indicator >150mm]