Resistex Argos Installation Guide

Safety Instructions

• Never work when voltage is present on the luminaire.
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• ⚠️ Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasives products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Installation Steps

Step 1: Preparation

Mark mounting points. The diagram shows a dimension of 800mm and indicates two screw holes for mounting.

Step 2: Mount Base Plate

Attach the circular base plate to the mounting surface using screws. The diagram shows the base plate being fixed with screws.

Step 3: Identify Terminals

Inside the base plate, identify the electrical connection terminals labeled N (Neutral), L (Live), and Earth (ground symbol).

Step 4: Connect Wires

Connect the power supply wires to the corresponding terminals. The diagram shows a close-up of wire connections, with a 'Click' sound indicated, suggesting a secure connection mechanism.

Step 5: Attach Fixture Body

Align and attach the main fixture body onto the mounted base plate.

Step 6: Cable Entry

Insert the power cable through the cable gland. The diagram specifies the cable type as HO5RN-F U-1000 R2V and indicates a suitable cable diameter range between 6mm and 9mm. A warning symbol is present.

Step 7: Secure Cable

Tighten the cable gland to secure the cable in place.

Step 8: Lock Fixture

Rotate the fixture body to lock it onto the base plate. The diagram shows a rotational locking action.

Step 9: Final Securing

Ensure the fixture is securely locked in place. Another 'Click' is indicated, confirming the secure attachment.

Step 10: Installation Complete

The fixture is now installed. The diagram shows the final mounted product with an upward arrow indicating successful installation.

Company Information

Website: www.resistex-sa.com

RESISTEX EXPLOITATION, 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: 04 93 276 276 - Fax: 04 93 276 280 - Email: contact@resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477

Product Ratings

ROHS Compliant

Class I Norm

IP Rating: 65

IK Rating: 10

CRI: 82

Warranty: 5 Years

CE Marked