Resistex AUREA Mât Installation Guide

Product Overview

This document provides essential installation and safety instructions for the Resistex AUREA Mât ceiling fan mount. It ensures proper setup and safe operation.

Brand: Resistex

Product Name: AUREA Mât

Official Website: www.resistex-sa.com

Installation Requirements & Safety

Mounting Clearances

To ensure safe and correct installation, adhere to the following minimum clearance distances:

• Minimum distance from ceiling: > 760mm
• Minimum distance from floor: > 2300mm
• Fan diameter: Ø1320

Safety Notes

[Warning] Always prioritize safety during installation:

• Never work on the fixture when it is live (under voltage).
• Installation must be performed by a qualified professional installer, adhering to all relevant electrical installation standards and regulations.
• Be aware of the risk of electrostatic discharge (ESD Norm). Handle components with necessary precautions.
• Carefully follow all provided notes and mounting steps for a successful installation.

Maintenance Instructions

Proper maintenance ensures longevity and performance:

• Do not use chemical or abrasive cleaning products on the fixture.
• Retain these installation instructions for future reference, including removal or maintenance tasks.
• For additional information regarding RESISTEX fixtures, please visit the official website: www.resistex-sa.com.
• RESISTEX disclaims responsibility for any misuse of the product.

Mounting and Installation Steps

Follow these step-by-step instructions for mounting the AUREA Mât:

Step 1: Prepare Ceiling Mount

Secure the ceiling mounting plate (Ø130mm) to the ceiling structure. Use the provided screws (X4). Ensure the mounting holes (Ø6mm) are correctly aligned. The plate design allows for an angle adjustment of up to 50°.

Step 2: Attach Pole to Ceiling Plate

Connect the main pole to the ceiling mounting plate. Secure firmly using the provided screws (X2). A PH2 type screwdriver is recommended for this step.

Step 3: Install Canopy

Fit the canopy to the ceiling. Route the electrical cable through the designated cable entry (Ø24mm) and secure it using the provided cable clamp (Ø10mm, X1).

Step 4: Connect Fixture and Wiring

Connect the main fixture to the pole and complete the electrical wiring according to standard electrical practices. Ensure all connections are secure and properly insulated.

General Assembly Notes

• Verify that all components are securely fastened after each step.
• Refer to the specific diagrams in the original documentation for precise component placement and orientation.

Company Contact Information

Manufacturer: RESISTEX EXPLOITATION

Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Phone: 04 93 276 276

Fax: 04 93 276 280

Email: contact@resistex-sa.com

APE Code: 2740Z

Siret Number: 487 593 477 00010

Share Capital: 649979 €

VAT Number: F.R. 73 487 593 477