Wampat Assembly Instructions

This document provides assembly instructions for Wampat TV stands, specifically models W04E3170R and W04E3171W. Please read all instructions carefully before beginning assembly and keep this manual for future reference.

WARNING: Serious or fatal injuries can occur from furniture tipping over. To prevent tipping, it is recommended to permanently fix the furniture to the wall. Wall anchor and hardware are included.

What's in the Box

Hardware:

• Cam bolt (A) x 26
• Cam lock (B) x 26
• Wooden dowel (C) x 27
• Shelf support pin (D) x 4
• Screw (E) x 8
• Plastic wedge with screw (F) x 12
• PVC nail with pin (G) x 6
• Part H (H) x 4
• Handle with bolt (I) x 2
• Wrench (J) x 1
• Wrench (K) x 1
• Part L (L) x 4
• L-iron (M) x 2
• Screw φ4*14 (N) x 8
• Part O (O) x 4
• Screw φ4*12 (P) x 8
• Part Q (Q) x 2
• Screw φ4*14 (R) x 8

Tools Required (Not included): Screwdriver, possibly a hammer for pins.

Assembly Options

Option A: TV Stand

This option assembles the unit as a standard TV stand without a fireplace insert.

Option B: Fireplace TV Stand

This option assembles the unit to accommodate a fireplace insert.

Installation Steps

Step 1

1. Screw cam bolts (A) into panels (1, 3, 4, 13).

Visual Description: Cam bolts (A) are screwed into designated holes on panels 1, 3, 4, and 13.

Step 2

2. Insert dowels (C) into panels (5, 6). Attach panels (13) to panels (5, 6) correctly. Insert and secure cam locks (B) to panels (5, 6) to lock them.

Visual Description: Dowels (C) are inserted into panels 5 and 6. Panel 13 is attached to panels 5 and 6 using cam locks (B).

Step 3

3. Secure part (15) to panel (14) with parts (H, J, K) correctly. This step involves multiple components and requires two people.

Visual Description: Part 15 is secured to panel 14 using hardware H, J, and K. This step is marked as requiring two people.

Step 4

4. Insert dowels (C) into panel (14). Attach panels (3, 4) to panel (14) correctly. Insert and secure cam locks (B) to panel (14) to lock them. This step requires two people.

Visual Description: Dowels (C) are inserted into panel 14. Panels 3 and 4 are attached to panel 14 using cam locks (B). This step is marked as requiring two people.

Step 5

5. Insert dowels (C) into panel (1). Attach panels (3, 4, 14) to panel (1) correctly. Insert and secure cam locks (B) to panels (3, 4, 14) to lock them. Attach panels (5, 6) to panel (1) correctly. Insert and secure cam locks (B) to panels (5, 6) to lock them. This step requires two people.

Visual Description: Dowels (C) are inserted into panel 1. Panels 3, 4, 14, 5, and 6 are attached to panel 1 using cam locks (B). This step is marked as requiring two people.

Step 6

6. Carefully slide parts (16, 17, 19) into place along the back of the assembly.

Visual Description: Parts 16, 17, and 19 are slid into grooves at the rear of the assembled unit.

Step 7

7. Insert dowels (C) into panels (3, 4, 5, 6). Attach panel (2) to panels (3, 4, 5, 6) with screws (E).

Visual Description: Dowels (C) are inserted into panels 3, 4, 5, and 6. Panel 2 is attached to these panels using screws (E).

Step 8

8. Screw cam bolts (A) into panel (2).

Visual Description: Cam bolts (A) are screwed into the underside of panel 2.

Step 9

9. Screw cam bolts (A) into panel (9). Insert dowels (C) into panels (7, 8). Attach panel (9) to panels (7, 8). Insert and secure cam locks (B) to panels (7, 8) to lock it.

Visual Description: Cam bolts (A) are screwed into panel 9. Dowels (C) are inserted into panels 7 and 8. Panel 9 is attached to panels 7 and 8 using cam locks (B).

Step 10

10. Insert dowels (C) into panel (2). Attach panels (7, 8, 9) to panel (2). Insert and secure cam locks (B) to panels (7, 8, 9) to lock them. Pins (G) are hammered into panels (7, 8, 9).

Visual Description: Dowels (C) are inserted into panel 2. Panels 7, 8, and 9 are attached to panel 2 using cam locks (B). Pins (G) are hammered into panels 7, 8, and 9.

Step 11

11. Secure parts (F1) with screws (F2) as per diagram.

Visual Description: Parts F1 are secured to the bottom of the unit using screws F2.

Step 12

12. Attach parts (L) to panels (10, 11) correctly. Attach part (12) to panels (10, 11) with bolts (I) correctly.

Visual Description: Parts L are attached to door panels 10 and 11. Shelf 12 is attached to panels 10 and 11 using bolts I.

Step 13

13. Attach parts (O) to panels (10, 11) with screws (P) correctly, but do not fix the screws tight initially.

Visual Description: Parts O are attached to door panels 10 and 11 using screws P, with a note to not tighten screws fully yet.

Step 14

14. Install the doors (10, 11) in position, adjust door height and leveling, then fix screws tight and slide doors (10, 11) into the designated area.

Visual Description: Doors 10 and 11 are installed, adjusted for height and leveling, then secured and slid into place.

Step 15

15. Option A: TV Stand Assembly Complete.

Visual Description: Shows the completed assembly for Option A (TV Stand).

Step 16

16. Option A: Attach parts (18, 20) to panels (5, 6) with screws (R) correctly.

Visual Description: Parts 18 and 20 are attached to panels 5 and 6 using screws R.

Step 17

17. Option A: Insert the shelf supports (D) at the desired level and place the adjustable shelf (12) onto the shelf supports.

Visual Description: Shelf support pins (D) are inserted into the unit, and the adjustable shelf (12) is placed on them.

Step 18

18. Option B: Fireplace TV Stand.

Visual Description: Overview of the structure for Option B (Fireplace TV Stand).

Step 19

19. Option B: Insert fireplace (22) from the back of the TV stand.

Visual Description: Fireplace unit (22) is inserted into the back of the TV stand.

Step 20

20. Option B: Attach parts (M) to panel (21) with screws (N) correctly. Attach part (21) to panels (5, 6) with screws (N) correctly.

Visual Description: Parts M are attached to panel 21, and panel 21 is attached to panels 5 and 6 using screws N.

Step 21

21. WARNING: To prevent TV cabinet from toppling, install the parts (Q) to secure it to the wall.

Visual Description: The unit is shown being anchored to a wall using parts Q, illustrating the safety warning.

Customer Support

For any questions, please contact Wampat customer support via Support@s-wampat.com. Please provide the purchase platform, order number, model number, and instruction version. Include a detailed photo of any faulty or missing parts.

Wampat is committed to providing assistance and will reply as soon as your message is received (usually within 24 hours).