Wampat TV Stand
Assembly Instructions
Models: BTS211801WB, BTS211803WW, BTS211804WE
Important: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
What's in the Box
The following parts and hardware are included in the package. Parts are identified by letters (A-M) and hardware by Roman numerals (I-IX).
Hardware:
- Hardware I: JCBCW SCREW M6X45 (x16)
- Hardware II: M4 ALLEN KEY (x1)
- Hardware III: CAM BOLT (x36)
- Hardware IV: CAM BOLT (SMALL) (x8)
- Hardware V: CAM LOCK (x44)
- Hardware VI: PVC NAIL WITH PIN (x6)
- Hardware VII: M8x30 WOOD DOWEL (x8)
- Hardware VIII: PLASTIC LEG & SCREW M3.5x16 (x2)
- Hardware IX: STICKER (x16)
Panels/Parts:
- Part A: Leg
- Part B: Leg
- Part C: Leg
- Part D: Leg
- Part E: Side Panel
- Part F: Side Panel
- Part G: Shelf Panel
- Part H: Shelf Panel
- Part I: Top/Bottom Panel
- Part J: Back Panel
- Part K: Shelf Panel
- Part L: Shelf Panel
- Part M: Back Panel / Support Panel
Tools Required (Not included):
- Screwdriver
- Hammer (optional, for dowels)
Important Notes & Warnings:
- Thank you for choosing Wampat products. Please read these instructions carefully before installation.
- Do not attempt to move the furniture without first removing all equipment.
- Warning: Death or serious injury may occur if children climb on furniture.
- If any parts are missing or damaged, do not return the item to the dealer; contact Customer Service. Never use damaged parts.
- For assistance, contact: Support@s-wampat.com
Assembly Steps
Step 1
Action:
- Screw cam bolts (IV) into the designated holes on legs (A, B, C, D).
Hardware Used:
- Cam Bolts (IV): x8
Step 2
Action:
- Insert dowels (VII) into the pre-drilled holes on panels (A, B, E).
- Insert cam locks (V) into the corresponding holes on side panel (E).
- Secure the panels by rotating the cam locks (V) to engage with the dowels (VII).
Hardware Used:
- Dowels (VII): x2
- Cam Locks (V): x4
Step 3
Action:
- Insert dowels (VII) into the pre-drilled holes on panels (C, D, F).
- Insert cam locks (V) into the corresponding holes on side panel (F).
- Secure the panels by rotating the cam locks (V) to engage with the dowels (VII).
Hardware Used:
- Dowels (VII): x2
- Cam Locks (V): x4
Step 4
Action:
- Secure cam bolts (III) into the designated holes on side panels (E, F).
Hardware Used:
- Cam Bolts (III): x2
Step 5
Action:
- Secure cam bolts (III) into the designated holes on panel (I).
- Attach panel (J) to panel (I) using screws (I).
Hardware Used:
- Cam Bolts (III): x4
- Screws (I): x4
Step 6
Action:
- Attach panel (J) to panel (I), ensuring the finished edge faces correctly.
- Secure panel (J) to panel (I) using screws (I).
Hardware Used:
- Screws (I): x4
Step 7
Action:
- Attach panel (H) to panel (I).
- Insert cam locks (V) into panel (H) and rotate to secure it to panel (I).
Hardware Used:
- Cam Locks (V): x4
Step 8
Action:
- Secure cam bolts (III) into the designated holes on panel (G).
Hardware Used:
- Cam Bolts (III): x4
Step 9
Action:
- Attach panel (G) to panel (H) using screws (I).
Hardware Used:
- Screws (I): x4
Step 10
Action:
- Attach panel (K) to panel (G).
- Insert cam locks (V) into panel (K) and rotate to secure it to panel (G).
Hardware Used:
- Cam Locks (V): x4
Step 11
Action:
- Assemble the left side panel structure.
- Insert dowels (VII) into the appropriate panels.
- Secure cam locks (V) to side panels (G, I, K) to lock the assembly.
Hardware Used:
- Dowels (VII): x2
- Cam Locks (V): x6
Step 12
Action:
- Assemble the right side panel structure.
- Insert dowels (VII) into the appropriate panels.
- Secure cam locks (V) to side panels (G, I, K, L) to lock the assembly.
Hardware Used:
- Dowels (VII): x2
- Cam Locks (V): x8
Step 13
Action:
- Attach leg (VIII) to panel (G) using screws.
Hardware Used:
- Legs (VIII): x2
Step 14
Action:
- Secure pins (VI) into the designated holes on legs (A, B, C, D, VIII).
Hardware Used:
- Pins (VI): x6
Step 15
Action:
- Secure cam bolts (III) into the designated holes on panel (M).
Hardware Used:
- Cam Bolts (III): x14
Step 16
Action:
- Assemble panel (M).
- Insert cam locks (V) into panels (E, F, J, L) and rotate to secure panel (M).
Hardware Used:
- Cam Locks (V): x10
Step 17
Action:
- Assemble panel (N) (Note: Panel N is not explicitly listed in parts, but appears in step 17 diagram. Assuming it's part of the back or a support).
- Insert cam lock (V) and screw (I) into side panel (N) to secure it.
Hardware Used:
- Cam Locks (V): x4
- Screws (I): x8
Step 18
Action:
- Final Assembly: Apply stickers (IX) over the visible cam locks (V) for a finished look.
Hardware Used:
- Stickers (IX): x16
