Wampat W11F4090W Assembly Instructions

General Safety and Assembly Precautions

Thank you for choosing Wampat products. Please read the instructions carefully before installation and keep them properly.

• Do not attempt to move this furniture without first removing all equipment.
• Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.
• Please contact Wampat using the details shown for further advice.
• WARNING: If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

What's in the Box

The following parts and hardware are included:

• A x 1 (GLUE)
• B x 10 (Wooden dowel Ø8 x 30mm)
• C x 26 (Wooden dowel Ø6 x 30mm)
• D x 10 (Cam lock Ø15 x 12mm)
• E x 10 (Cam bolt Ø7 x 34mm)
• F x 27 (Cam lock Ø14 x 11mm)
• G x 27 (Cam bolt Ø6 x 29mm)
• H x 6 (Handle)
• I x 2 (Handle bolt Ø4x20x8mm)
• J x 4 (Handle bolt Ø4x12x8mm)
• K x 2 (Screw Ø4x25x8mm)
• L x 12 (Screw Ø4x30x8mm)
• M x 4 (Screw Ø4x40x8mm)
• N x 3 (Screw Ø3.5x16x6mm)
• O x 4 (Bolt Ø1/4x35x11mm)
• P x 1 (Hex Key M4 x 54)
• Q x 4 (Footpads)
• R x 7 (Plastic wedge)
• S x 7 (Screw Ø3x16mm)
• T x 4 (Sticker)
• U x 1 (Part U)
• Y x 1 (Tipping restraint hardware kit: a, b, c, d, e)

Tools Required (Not Included): Phillips head screwdriver.

Assembly Steps

1. Step 1: Screw cam bolts (E, G) into panels (3, 4). Insert dowels (B, C) into panels (3, 4, 5, 7).
   • The provided glue (A) is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the dowel. Wipe away excess glue immediately.
   • In future assembly steps when dowels are necessary to attach assembly parts together, place a small amount of glue on the end of the dowel before attaching parts together. Wipe away excess glue immediately.
2. Step 2: Screw cam bolts (E, G) into panels (1, 2).
3. Step 3: Insert and secure cam locks (F) to panels (5) to lock it. Insert and secure cam locks (D) to panels (7) to lock it.
4. Step 4: Insert and secure cam locks (F) to panels (5) to lock it. Insert and secure cam locks (D) to panels (7) to lock it.
5. Step 5: Attach part (U) to panels (5) with bolt (O) correctly.
6. Step 6: Attach panels (2) to Wooden leg (8). Insert and secure screw (M) to Wooden leg (8) to lock it. Stick stickers (T) on screw (M).
7. Step 7: Insert and secure cam locks (F) to panels (5) to lock it. Insert and secure cam locks (D) to panels (3, 4) to lock it.
8. Step 8: Carefully slide panels (6) into place along the back of the assembly. Attach panels (6) to panels (5) with screws (N) correctly.
9. Step 9: Insert and secure cam locks (D) to panels (3, 4) to lock it.
10. Step 10: Secure parts (R) to panels (1, 3, 4) using screws (S).
11. Step 11: Screw cam bolts (G) into panels (9, 10). Insert dowels (C) into panels (12, 13, 14).
12. Step 12: Attach panels (12, 13) to panel (10) with screws (L). Insert and secure cam locks (F) to panels (14) to lock it.
13. Step 13: Carefully slide panel (11) into place along the bottom of the assembly. Attach panels (11) to panels (14) with screws (K) correctly.
14. Step 14: Attach Handle (H) to panel (9) with bolts (I). Attach panel (9) to panels (12, 13, 14). Insert and secure cam locks (F) to panels (12, 13, 14) to lock it.
15. Step 15: Screw cam bolts (G) into panels (15). Insert dowels (C) into panels (16, 18, 19).
16. Step 16: Attach panels (18, 19) to panel (16) with screws (L).
17. Step 17: Carefully slide panel (17) into place along the bottom of the assembly. Insert and secure cam locks (F) to panels (20) to lock it.
18. Step 18: Attach Handle (H) to panel (15) with bolts (J). Attach panel (15) to panels (18, 19, 20). Insert and secure cam locks (F) to panels (18, 19, 20) to lock it.
19. Step 19: Insert drawers into the dresser frame.
20. Step 20: Anti-Tip Warning: Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over, Wampat recommends that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.

    Connector Components:

    • a, b, c, d, e (from Tipping restraint hardware kit Y)