Kichler Kelce Semi-Flush Mount
Model #: 38270
Item #: 1008330161, 321962282
For French version, see page 7. For Spanish version, see page 13.
Attach Your Receipt
Serial Number: ____________________
Purchase Date: ____________________
Customer Support
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 800-554-6504, 8 a.m. – 4:30 p.m. EST, Monday - Friday.
Package Contents
| PART | DESCRIPTION | QTY. |
|---|---|---|
| A | Mounting Bracket | 1 |
| B | Canopy | 1 |
| C | Glass Shade | 1 |
| D | Socket Ring | 1 |
| E | Socket | 1 |
Hardware Contents
| ITEM | DESCRIPTION | QUANTITY |
|---|---|---|
| AA | Wire Connector | 3 |
| BB | Long Machine Screw | 2 |
| CC | Short Machine Screw | 2 |
Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
WARNING: CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fusebox before starting and during the installation.
WARNING:
This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. If you are not familiar with code requirements, installation by a certified electrician is recommended.
Do not use bulbs with wattage greater than specified on this fixture.
California Proposition 65 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to http://www.P65Warnings.ca.gov
CAUTION:
If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely, please contact a licensed electrical contractor.
All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate ETL listing and/or C.S.A. certification of this fixture.
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses.
Skill Level: Beginner
Assembly Instructions
Step 1: Mount the Bracket
Orient the mounting bracket (A) so that the flanges are positioned down. Connect the mounting bracket to the outlet box (not included) with the long machine screws (BB).
NOTE: If the mounting bracket is recessed into the ceiling after installation, it may be necessary to back out the long machine screws such that the mounting bracket is flush with the ceiling.
Hardware Used: BB Long Machine Screw x 2
Diagram 1 shows the mounting bracket (A) being attached to an outlet box using two long machine screws (BB). An arrow indicates the direction of installation.Step 2: Wire Connections
Ground wire:
- For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (A) no less than 2 inches from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
- For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (A). Tighten ground screw. Connect fixture ground wire to outlet ground wire with a wire connector (AA).
Supply wires:
- Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White or Parallel Cord "D" shaped and ribbed).
- Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black or Parallel Cord round and smooth).
NOTE: Fixture wires will either be: Black and White; or Parallel Cord SPT-1 lamp wire with one round smooth wire and one "D" shaped ribbed wire.
Hardware Used: AA Wire Connector x 3
Diagram 2 illustrates wire connections. It shows how to connect the ground wire from the outlet box to the mounting bracket's ground screw and then to the fixture's ground wire using a wire connector (AA). It also details connecting the black and white supply wires to the corresponding fixture wires, including options for parallel cords with different wire shapes.Step 3: Attach the Canopy
Raise canopy to the ceiling such that the thru holes in the canopy align with the holes on the flanges of the mounting bracket. Secure with short machine screws (CC).
Hardware Used: CC Short Machine Screw x 2
Diagram 3 shows the canopy being raised to the ceiling and secured to the mounting bracket (A) using short machine screws (CC).Step 4: Install the Glass Shade
Remove socket ring (D) from socket (E). Pass glass shade (C) over socket and secure in place with the socket ring. Do not overtighten.
Diagram 4 shows the glass shade (C) being placed over the socket (E) and then secured by the socket ring (D).Step 5: Install the Bulb
Insert 60-watt max. medium base bulb or LED equivalent (not included) into socket (E).
Diagram 5 shows a light bulb being inserted upwards into the socket (E).Care and Maintenance
- Always be certain that electric current is turned off before cleaning this item.
- Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
- All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
Troubleshooting
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Fixture does not light. | 1. Fixture may be wired incorrectly. 2. Worn or broken bulb. |
1. Check wiring. 2. Replace bulb. |
Our Locations | Kichler Lighting
p65warnings.ca.gov
