SIDE TABLE

Welcome Message

Dear Valued Customers: On behalf of our entire team, I'd like to take this opportunity to welcome you as our new customer. I hope you are enjoying your recent purchase. I am thrilled to have you with us. We pride ourselves on providing the best quality products to our customers. Our customers are the most important part of our business, and we work tirelessly to ensure your complete satisfaction. If, for any reason, you are not completely satisfied with your purchase, we encourage you to email or call us at any time with your questions and comments so that we can address your concerns as soon as possible. We would be very grateful if you could spare a few minutes to leave a product review. By doing so, you'll give millions of fellow shoppers vital information to help them make the right purchase decision in the future. We deeply appreciate your honest review of the product. Thank you again and Have a lovely day! Sincerely, Director of the Customer Care Team

Assembly Tools Required

? No. 2 Phillips Screwdriver (Tip Shown Actual Size)

? Skip the power trip. This time.

Part Identification

• 1. TOP (1)
• 2. LEFT END (1)
• 3. RIGHT END (1)
• 4. BOTTOM (1)
• 5. BACK (1)
• 6. LEG (4)
• 7. LEFT DRAWER SIDE (1)
• 8. RIGHT DRAWER SIDE (1)
• 9. DRAWER BACK (1)
• 10. SMALL DRAWER FRONT (1)
• 11. DRAWER BOTTOM (1)
• 12. DRAWER FRONT (1)

Diagram Description: An exploded view showing all parts labeled with numbers 1 through 12.

Hardware Identification

• A. HIDDEN CAM - 4+1
• B. CAM SCREW - 4+1
• C. WOOD DOWEL - 12+1
• D. 3/4" NAIL - 8+1
• E. 1-1/2" FLAT HEAD SCREW - 12+1
• F. 1/2" MACHINE SCREW - 2+1
• G. 1-3/4" MACHINE SCREW - 8+1
• H. 7/8" PAN HEAD SCREW - 3+1
• I. APPLIQUE CARD - 1
• J. PULL - 1
• K. FELT FEET - 4
• L. WRENCH - 1
• M. WASHER - 8
• N. LOCK WASHER - 8
• O. USB PORT - 1

Diagram Description: Visual representations of all hardware components labeled A through O.

Assembly Steps

Step 1

Attach 4 Cam Screws (B) to Part 1 (TOP).

Diagram Description: Part 1 (TOP) with four cam screws being inserted.

Step 2

Insert 8 Wood Dowels (C) into Parts 2 (LEFT END) and 3 (RIGHT END).

Diagram Description: Parts 2 and 3 each with multiple wood dowels being inserted.

Step 3

Connect Parts 2 and 3 to Part 1 using 4 Hidden Cams (A). Ensure the arrow on the hidden cam points towards the edge of the board.

Diagram Description: An assembly showing parts 1, 2, and 3 being joined. Close-up views illustrate the correct orientation of the hidden cam mechanism.

Step 4

Attach Part 4 (BOTTOM) to the assembled structure using 4 1-1/2" Flat Head Screws (E). Ensure the unfinished side of Part 4 faces inwards.

Diagram Description: The partially assembled unit with Part 4 being attached using screws.

Step 5

Attach Part 5 (BACK) using 8 3/4" Nails (D). Ensure the finished side faces outwards.

Diagram Description: The unit with Part 5 being attached using nails, indicated by a hammer icon.

Step 6

Attach the 4 Legs (6) to the bottom of the unit. Use 4 Wood Dowels (C), 8 1-3/4" Machine Screws (G), 8 Washers (M), and 8 Lock Washers (N). Use the provided Wrench (L) for tightening.

Diagram Description: The unit upside down, showing legs being attached with screws, washers, and lock washers. Close-up views show the hardware configuration.

Step 7

Attach 4 Felt Feet (K) to the bottom of each leg.

Diagram Description: The bottom of the legs with felt feet being applied.

Step 8

Assemble the drawer box: Connect Drawer Sides (7, 8) and Drawer Back (9) using 4 1-1/2" Flat Head Screws (E).

Diagram Description: Drawer parts 7, 8, and 9 being joined with screws.

Step 9

Slide Drawer Bottom (11) into the grooves of the assembled drawer sides and back. Ensure the finished side of the drawer bottom faces upwards.

Diagram Description: The drawer box with the drawer bottom being slid into place.

Step 10

Secure the drawer assembly by attaching the Drawer Back (9) to the Drawer Sides (7, 8) using 4 1-1/2" Flat Head Screws (E).

Diagram Description: The drawer box structure with screws securing the back panel to the sides.

Step 11

Attach the Pull (J) to the Drawer Front (12) using 2 1/2" Machine Screws (F).

Diagram Description: The drawer front (12) with the pull (J) being attached from the inside using screws.

Step 12

Attach the assembled drawer front (12) to the drawer box using 3 7/8" Pan Head Screws (H).

Diagram Description: The drawer box with the drawer front being attached using screws.

Step 13

Install Drawer Slides: Pull out the inner slide from the cabinet member. Align and slide the drawer members into the cabinet members. Ensure smooth operation.

Diagram Description: Two diagrams showing the correct alignment and insertion of drawer slides. One shows a correct insertion with a checkmark (✔️), and two show incorrect insertions with crosses (❌).

Step 14

Final Assembly & Care: Peel Applique Cards (I) and stick one onto each visible Hidden Cam. Install the USB Port (O) ?. The table top supports up to 30 lbs, and the drawer supports up to 15 lbs. Clean with a favorite furniture polish or a damp cloth, then wipe dry.

Diagram Description: The completed side table with the USB port installed. Applique cards are shown being placed over hidden cams. Weight limits are indicated.

Safety Precautions

• Overloading: Do not overload shelves and drawers. Improper loading can make the product top-heavy and may cause breakage.
• Moving Furniture: Do not move furniture not equipped with wheels improperly. This can cause breakage or injury.
• Weight Limits: Never exceed the weight limits indicated in the instructions (30 lbs for top, 15 lbs for drawer).
• Loading/Unloading: Work from bottom to top when loading. Unload from top to bottom before moving.
• Lifting: Do not push furniture, especially on carpet. Get help to lift and move the item. Support the center of the top when lifting.
• Television Placement: This product is not designed to support a television. Placing TVs on furniture not designed for them is hazardous and can lead to injury or death.

1-Year Limited Warranty

Provides limited warranty coverage for one year from the date of purchase against defects in materials or workmanship.

Exclusions: Warranty does not cover damage from improper assembly, misuse, abuse, intentional damage, fire, flood, alteration, incorrect maintenance, rented products, or items purchased "used" or "as is".

Remedy: The exclusive remedy is repair or replacement of defective components at the manufacturer's sole option. Replacement parts are warranted for the remaining period of the original warranty.

Limitation of Liability: The manufacturer is not liable for incidental or consequential damages (e.g., loss of use, labor, transportation). Some states may not allow these limitations.

Transferability: The warranty is non-transferable and void if the product is resold, leased, or rented to a third party.

Other Warranties: No other warranties, express or implied (including merchantability or fitness for a particular purpose), apply beyond the duration of this express warranty, as permitted by law.