Installation & Assembly
Notice
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
- If you encounter any problems during installation, please contact customer service.
- Please unbox the item from the side with an open-label and put a carpet on the floor to avoid scratching it.
[Recommended installers: 2] [Estimated installation time: 20 minutes]
Parts List
| Item No. | Reference Description | Quantity | Item No. | Reference Description | Quantity |
|---|---|---|---|---|---|
| A | Circular tabletop disc | x1 | 1 | Long, thin screw | x12 |
| B | Circular base disc | x1 | 2 | Shorter, thicker screw | x24 |
| C | Curved table leg | x3 | 3 | Allen wrench | x1 |
Assembly Instructions
Step 1
Attach the three curved table legs (C) to the circular base (B) using twelve long screws (1). Tighten the screws with the Allen wrench (3).
Step 2
Place the assembled base and legs onto the underside of the tabletop (A). Ensure the feet of the legs are positioned within the indicated circular dotted marks. Secure the assembly using twenty-four shorter screws (2).
After installing the table legs, place the feet completely inside the circular dotted marks and install the self-tapping screws directly.
