NORDLI Modular Chest Assembly Instructions
Important Safety Information
⚠️ WARNING:
- Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instructions carefully.
Tools and Parts Overview
Tools required: Two types of screwdrivers (one with a flat head, one with a cross head) and a hammer. [?] [?] [?]
Parts Identification: The assembly involves various components categorized as A, B, and C2, along with numerous fasteners and hardware pieces. Key components include:
- Kit A: Contains cam lock housings (e.g., 102509), screws (e.g., 119030), connecting pins (e.g., 100349, 131396).
- Kit B: Includes drawer slides (e.g., 125325, 10076576, 125326, 10076599), various connectors (e.g., 118331, 112996), and drawer runners.
- Kit C2: Contains specific connectors and pins (e.g., 101345, 104663, 118331, 112996, 102509, 100498, 101345, 106940, 122972, 122973).
- Drawer Slides: Multiple sets of drawer slides are used throughout the assembly (e.g., 3x sets of L/R slides).
Note: Specific part numbers are referenced in the steps below.
Assembly Steps
Step 1
Prepare the base panels.
Attach four cam lock housings (102509) to the designated holes on two large panels. Insert four connecting pins (100349) into corresponding holes.
Step 2
Attach drawer slides to side panels.
Take two side panels. Attach three sets of drawer slides (labeled 'L' for left and 'R' for right) to the inner faces of these panels using screws (118331). Ensure the slides are aligned with the pre-drilled holes.
Step 3
Continue attaching drawer slides.
Attach another three sets of drawer slides (labeled 'L' and 'R') to the second set of side panels using screws (112996).
Step 4
Attach drawer slides to base panels.
Attach drawer slides (10076576) to the two base panels using screws (101372).
Step 5
Assemble the main frame sides.
Take the prepared side panels from Step 2. Insert wooden dowels (101345) into the edges of the panels. Connect these panels to the base panels prepared in Step 1, aligning the dowels and cam lock housings. Secure by turning the cam locks (102509).
Step 6
Attach the back panel.
Slide the back panel into the grooves on the side panels. Secure the back panel using cam lock housings (102509) and connecting pins (131396).
Step 7
Attach the second set of side panels.
Connect the second set of side panels (prepared in Step 3) to the structure. Align dowels and cam lock housings and secure by turning the cam locks.
Step 8
Install internal drawer runners.
Attach two sets of drawer runners (104663) to the inside of the assembled frame using screws (147191).
Step 9
Attach top panel.
Place the top panel onto the assembled frame. Secure using connecting pins (100349) and cam locks (102509).
Step 10
Assemble drawer boxes (Part 1).
For drawer assembly: Insert connecting pins (118331, 112996) into drawer side panels. Attach drawer slides (125325, 10076576) to the bottom edges of the drawer sides.
Step 11
Assemble drawer boxes (Part 2).
Connect drawer front and back panels to the drawer sides using the inserted pins and cam locks. Ensure the drawer bottom panel slides into the grooves.
Step 12
Assemble drawer boxes (Part 3).
Secure the drawer assembly by tightening the cam locks.
Step 13
Attach drawer front panel.
Connect the drawer front panel to the assembled drawer box. Use connecting pins (159245) and cam locks (101372).
Step 14
Attach drawer front panel (continued).
Secure the drawer front panel using cam locks (101372) and connecting pins (159245).
Step 15
Attach drawer handles.
Insert screws (119030) through the pre-drilled holes on the inside of the drawer front and attach the handles.
Step 16
Attach drawer runners to drawer sides.
Attach the corresponding drawer runners (119030) to the sides of the drawer boxes using screws (159247).
Step 17
Attach drawer front panel.
Connect the drawer front panel to the drawer box. Use connecting pins (159247) and cam locks.
Step 18
Attach drawer front panel.
Secure the drawer front panel using screws (145718).
Step 19
Attach drawer front panel.
Secure the drawer front panel using connecting pins (119030) and cam locks.
Step 20
Attach drawer slides to the frame.
Attach drawer slides (104663) to the inside of the main unit frame using screws (147191).
Step 21
Attach drawer slides to the frame.
Attach drawer slides (104663) to the inside of the main unit frame using screws (147191).
Step 22
Insert drawers into the frame.
Align the drawer slides on the drawer box with the runners inside the main unit frame. Push the drawer in until it clicks into place. ?? (Safety warning reminder: Never put a TV on this product).
Step 23
Insert drawers into the frame.
Align the drawer slides on the drawer box with the runners inside the main unit frame. Push the drawer in until it clicks into place. "Click!"
Final Check
Ensure all drawers are inserted correctly and operate smoothly. Verify that the anti-tip device is installed if provided with the unit.
Product Information
This document provides assembly instructions for the NORDLI modular chest of drawers by IKEA. It is designed for consumer use and requires careful assembly following the provided steps.
