Brookstone Audioshades

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

WARNING Li-ion Battery Inside

This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery and do not use it in damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

Rating Label Definitions

Direct current symbol: ⎓

This symbol signifies that this is a wireless device powered by Bluetooth® technology. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license.

This symbol signifies that the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. [Recycle Symbol]

This symbol signifies and declares that this equipment complies with battery charging which complies with California CEC and energy efficiency.

Warranty Information

90-Day Limited Warranty
Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship ("Warranty") as follows:

To obtain warranty service:

• Visit our customer support portal: www.customersupport123.com
• Select the brand and model of your device
• Select "Service Request" and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.

Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

(Warranty continued on the next page)

Before You Begin

READ THIS MANUAL CAREFULLY AND SAVE FOR FUTURE REFERENCE

To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer-approved batteries, chargers, accessories, and supplies.

• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the device to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
• Low battery may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• Do not submerge in water.
• Do not allow any of the ports on the speaker or any of the connectors of the supplied power adapter or cables to be exposed to dust or water, or come into contact with any conductive materials such as liquids, metallic powders, etc.
• The speaker contains a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.

Questions & Customer Support

For any issues concerning this product, please visit our website at customerservice123.com and select the Brand of the device.

In the Box

• BSBTS5 - Sunglasses with Built-In Speakers (x1)
• Micro-USB Charging Cable (x1)
• Instruction Manual (x1)

Location of Controls

LED Indicator

[+] [-] Buttons
Press: Skip tracks
Press + hold: Adjust volume

[ ] Button
Press: Play/pause, answer/end call
Press + hold: Power ON/OFF

Diagram showing sunglasses with labels for LED Indicator, [+] [-] Buttons, [ ] Button, and Charging Port.

Charging the Speakers

Plug the small connector of the included charging cable into the micro-USB charging port on the right arm of the sunglasses. Plug the large connector into the USB port on a computer, or into a 5V USB adapter and plug into an electrical socket.

The LED indicator will light up RED while charging and turn OFF when fully charged.

On lower power, a tone will be heard indicating that the speakers needs to be recharged.

Powering ON/OFF

• Press and hold the [ ] button to power the built-in speakers ON or OFF.
• When powered on, the speakers will enter Bluetooth pairing mode, and may automatically re-pair to any previously-paired device in range.

Playing Music

To enjoy music on your sunglasses, make sure that the speakers are properly paired to a Bluetooth-enabled device. If you are pairing the device for the first time, please consult the Bluetooth Pairing section on the next page.

Once paired, all playback & volume will be controlled by your paired device.

Bluetooth Pairing

1. Power ON. A tone will be heard and the LED indicator will quickly flash RED and BLUE.
2. Set your mobile device to search for Bluetooth devices. When it appears, select BSBTS5 from the list of found devices.
3. After a successful pairing, a tone will be heard and the LED indicator will turn solid BLUE.

Adjusting Playback & Volume

Playback and volume can be adjusted with the controls on your device, or with the controls on the sunglasses listed below.

• Press the [ ] button on the sunglasses to pause and resume playback.
• Press the [+] and [-] buttons to skip tracks.
• Press and hold the [+] and [-] buttons to adjust volume.

Using the Phone Functions

To use the phone functions through the sunglasses, you must be paired to a Bluetooth device.

• Press the [ ] button to answer an incoming call.
• Press the [ ] button to end a call.
• Press and hold the [ ] button to reject an incoming call.
• 2x press the [ ] button to redial the last outgoing number.